New
#1
[Problem] "Repair Your Computer"
Brief introduction:
I'm Rob and I'm literally new in this forum (haven't done any searches to my problems as of now) and would like to have some help regarding my current 3 problems in my main computer (OS-related?). I'll do some searching here when I get some time, probably tomorrow (2:00am here already)
I decided to create 3 separate thread for my 3 problems but I'll insert the links here.
I hope it's okay for the administrators.
[Problem] "Check for solutions"
https://www.sevenforums.com/general-d...ml#post1190630
If any details are needed, just ask me :)
===============================================================
Repair Your Computer
Some details:
3 current partition: C:\ F:\ and L:\
1 DVD-ROM: E:\
1 virtual BD-ROM: D:\
Last weekend, I scanned 5 HDD from my other computers since it's busted. 2 of which cannot be accessed anymore (it can't be read). I used a USB-to-IDE device in order for me to access all 5 HDD and have a scan. I had a problem accessing the 2 HDD but eventually I have saved it by formatting it after it got detected by my main computer. Whenever I scan, I always go to Safe Mode since I have read somewhere that it stops viruses from being "active." So I used MSE together with MBAM and SAS.
Safe Mode -> Scan HDD1 -> Restart -> Safe Mode -> Re-scan HDD1 -> Scan main computer -> Restart -> Safe Mode -> Scan HDD2 -> and so on
During my first Restart and going back to Safe Mode, I noticed that a new Option was added after pressing F8 (what's the proper term for this procedure?): it's "Repair Your Computer" being on top of "Safe Mode." I did not mind it until after I scan my main computer, restarted, go to safe mode and it's still there so what I did is choose it (I got curious). I tried Startup Repair Diagnosis (or something, I can't remember right now) it as well as diagnose/repair the memory. The memory seemed okay, no log whatsoever but the Startup Repair Diagnosis has one. I'll post it later so you guys could interpret it if it's okay.
Here's the log
===============================================================Startup Repair diagnosis and repair log
---------------------------
Last successful boot time: 1/15/2011 6:56:29 AM (GMT)
Number of repair attempts: 1
Session details
---------------------------
System Disk = \Device\Harddisk0
Windows directory = E:\Windows
AutoChk Run = 0
Number of root causes = 1
Test Performed:
---------------------------
Name: Check for updates
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: System disk test
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Disk failure diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 94 ms
Test Performed:
---------------------------
Name: Disk metadata test
Result: Completed successfully. Error code = 0x0
Time taken = 16 ms
Test Performed:
---------------------------
Name: Target OS test
Result: Completed successfully. Error code = 0x0
Time taken = 78 ms
Test Performed:
---------------------------
Name: Volume content check
Result: Completed successfully. Error code = 0x0
Time taken = 140 ms
Test Performed:
---------------------------
Name: Boot manager diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: System boot log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Event log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 78 ms
Test Performed:
---------------------------
Name: Internal state check
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Boot status test
Result: Completed successfully. Error code = 0x0
Time taken = 31 ms
Root cause found:
---------------------------
Boot status indicates that the OS booted successfully.
---------------------------
---------------------------