Solved BSOD Random IRQL_NOT_LESS_OR_EQUAL (STOP: 0x0000000A)

[panais]

Just give it time,wait a little (until tomorrow maybe) then again post back with results,for furthers instructions.

 

[humah]

Okey...

Here's latest BSOD!

 

[panais]

Update these old drivers,

ASACPI.sys        fffff880`02ea4000    fffff880`02eac000    0x00008000    0x4a0b72fd    14-May-09 4:25:17 πμ                        
GEARAspiWDM.sys        fffff880`04a00000    fffff880`04a0d000    0x0000d000    0x4a1151c0    18-May-09 3:17:04 μμ

ASACPI.sys is >---> Asus ATK0110 ACPI Utility (a known BSOD maker in Win7). Also a part of the Asus PCProbe and AISuite Utilities.
ASUSTeK Computer Inc. -Support- Drivers and Download

GEARAspiWDM.sys is >---> CD-ROM Class Filter Driver by Gear Software
Also comes with iTunes
GEAR Software - DVD Mastering Software & CD Burning Software & GEAR PRO Mastering

Tip: Always,everything and anything not necessary just uninstall it from your system).For example if you have installed in your system poweriso 2008 and you never use it just uninstall it.

Old software\drivers=bsod.

 

[humah]

panais,

I've already updated ASACPI.sys as the latest version from ASUS driver downloads: there's any other source I can't remember where get it?

And I've unistalled ITunes... and never installed poweriso 2008! How I can unistall?

I've got not much on my system right now, not even far from a working usable machine!

And by the way, thanks a lot for your help, I really appreciate that!

 

[panais]

panais,

I've already updated ASACPI.sys as the latest version from ASUS driver downloads: there's any other source I can't remember where get it?

And I've unistalled ITunes... and never installed poweriso 2008! How I can unistall?

I've got not much on my system right now, not even far from a working usable machine!

And by the way, thanks a lot for your help, I really appreciate that!

poweriso 2008 it was just an example!!

 

[humah]

panais,

I've already updated ASACPI.sys as the latest version from ASUS driver downloads: there's any other source I can't remember where get it?

And I've unistalled ITunes... and never installed poweriso 2008! How I can unistall?

I've got not much on my system right now, not even far from a working usable machine!

And by the way, thanks a lot for your help, I really appreciate that!

poweriso 2008 it was just an example!!

Oh... Okey

Just rebooted, I keep my finger crossed...

 

[humah]

Just in case it helps ( because I really think it's the main problem here ) my ASACPI.sys versioning is 1043.5.0.0 dated 14/05/2009 (as the latest version from ASUS)

 

[humah]

BSOD again....

 

[humah]

Crashed again and again... but I've noticed that it does every time I do a disk operation ( download, copy, extract, etc.. )

 

[panais]

Did you disable driver verifier? If not please disable it.

Run memtest,this time leave it to run overnight if possible.
http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

 

[humah]

No, it's still enabled and another BSOD just happend... again when I was copying my data on disks...

I've updated ASACPI.sys to it's latest version ( I've found 1043.6.0.0 dated 10/10/2009 hidden on ASUS FTP ) and tryied but not...

Already leaved memtest86+ for hours some days ago, 7 pass and no errors found... I leave it again this night just to be extra sure but I really think the problem it's not the ram ( I've tried it a lot )

Anyway, here's my dumps

 

[yowanvista]

No, it's still enabled and another BSOD just happend... again when I was copying my data on disks...

I've updated ASACPI.sys to it's latest version ( I've found 1043.6.0.0 dated 10/10/2009 hidden on ASUS FTP ) and tryied but not...

Already leaved memtest86+ for hours some days ago, 7 pass and no errors found... I leave it again this night just to be extra sure but I really think the problem it's not the ram ( I've tried it a lot )

Anyway, here's my dumps

All your drivers are updated, now either its a hardware issue or some kind of Malware activity, run a scan of Malwarebytes
Reset your BIOS RAM settings especially your RAM voltages and timings to their Default/Auto values

 

[humah]

Malwerebytes found nothing, and I leaved memtest86+ all night with 12 pass and 0 errors... BIOS is on default setting since the first installation for almost all ( just disabled floppy that I haven't it ), I'm really speechless..

 

[humah]

Another crash... Should I put the pc on trash and get a new one?

 

[yowanvista]

Please re-enable driver verifier, current dumps do not indicate any causes
Update your Logitech Setpoint software
Support + Downloads

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffffa80239ba448, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002ccf72c, address which referenced memory

Debugging Details:
------------------


WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002efa100
 fffffa80239ba448 

CURRENT_IRQL:  2

FAULTING_IP: 
nt!KeWaitForSingleObject+17c
fffff800`02ccf72c 4c8938          mov     qword ptr [rax],r15

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP

BUGCHECK_STR:  0xA

PROCESS_NAME:  plugin-contain

TRAP_FRAME:  fffff88007015980 -- (.trap 0xfffff88007015980)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa80239ba448 rbx=0000000000000000 rcx=fffffa80039ba448
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002ccf72c rsp=fffff88007015b10 rbp=0000000000000000
 r8=fffff78000000008  r9=0000000000000000 r10=0000000000000001
r11=fffff880009ea180 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
nt!KeWaitForSingleObject+0x17c:
fffff800`02ccf72c 4c8938          mov     qword ptr [rax],r15 ds:0001:fffffa80`239ba448=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002cc71e9 to fffff80002cc7c40

STACK_TEXT:  
fffff880`07015838 fffff800`02cc71e9 : 00000000`0000000a fffffa80`239ba448 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`07015840 fffff800`02cc5e60 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff880`07015980 fffff800`02ccf72c : 00000000`00000500 ffffe119`56db9f00 00000000`00000824 fffff800`02c8270a : nt!KiPageFault+0x260
fffff880`07015b10 fffff800`02fbe44e : 00000000`00000000 fffff800`00000006 00000000`00000001 00000000`00000000 : nt!KeWaitForSingleObject+0x17c
fffff880`07015bb0 fffff800`02cc6ed3 : fffffa80`03ba0800 00000000`00000500 00000000`00000000 fffffa80`039ba440 : nt!NtWaitForSingleObject+0xde
fffff880`07015c20 00000000`73902e09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0691eb78 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x73902e09


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!KeWaitForSingleObject+17c
fffff800`02ccf72c 4c8938          mov     qword ptr [rax],r15

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  nt!KeWaitForSingleObject+17c

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  4e02aaa3

FAILURE_BUCKET_ID:  X64_0xA_VRF_nt!KeWaitForSingleObject+17c

BUCKET_ID:  X64_0xA_VRF_nt!KeWaitForSingleObject+17c

Followup: MachineOwner
---------

 

[humah]

Updated all Logitech drivers and enabled Driver Verifier... I try to copy some other things again : seems to help the BSOD!

 

[humah]

Crash... here's the files

 

[humah]

Crashed again.. this time I was doing nothing... I'm out of ideas... Last thing it could be it's the CPU, the only one thing that I haven't changed yet on this machine...

 

[yowanvista]

Crashed again.. this time I was doing nothing... I'm out of ideas... Last thing it could be it's the CPU, the only one thing that I haven't changed yet on this machine...

You can test your CPU with Prime95, but dumps are still blaming Memory
www.sevenforums.com/tutorials/100352-cpu-stress-test-prime95.html

 

[Jonathan_King]

Hello,

In addition to the Prime95 tests Yowan suggested (run all three!), try flashing the latest BIOS from here: ASUSTeK Computer Inc. - Motherboards- ASUS P5Q-E

What is the make/model of your PSU?