Intel core i5 2500k 0x0000124 help!

[loox]

Hey i have a storm by BSOD but when i turn my i5 to only work from 2 cores it will work just fine. But i'ts slower becouse i only runs from 2 cores. What can be the problem? have all the lates driver, no overclock, cpu temp 34 C, all cabels connected.. Help thanks!

Asrock fatal1ty professional (updated)
Corsair ax 850w
Corsair vengance 4gb 1866mzh
Corsair vengance 4gb 1866mzh
Corsair h80
Corsair force 3 (have disconnected it and boot from usb no change, have the update to)
Msi geforce 560 ti (updated)
Nzxt phantom



(DMP file)
102811-6068-01.dmp

 

[zigzag3143]

Hey i have a storm by BSOD but when i turn my i5 to only work from 2 cores it will work just fine. But i'ts slower becouse i only runs from 2 cores. What can be the problem? have all the lates driver, no overclock, cpu temp 34 C, all cabels connected.. Help thanks!

Asrock fatal1ty professional (updated)
Corsair ax 850w
Corsair vengance 4gb 1866mzh
Corsair vengance 4gb 1866mzh
Corsair h80
Corsair force 3 (have disconnected it and boot from usb no change, have the update to)
Msi geforce 560 ti (updated)
Nzxt phantom



(DMP file)
102811-6068-01.dmp

Your .dmp file shows a stop error of 0x124 which is a general hardware error .

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

You can read more on this error and what to try here... http://www.sevenforums.com/crash-lockup-debug-how/35349-stop-0x124-what-means-what-try.html


Before doing the above I would remove Symantec and replace with Microsoft Security Essentials

http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN

Microsoft Security Essentials - Free Antivirus for Windows

 

[essenbe]

It would also be helpful if you fill out your system specs. At the bottom left of your post is system specs, click that and then update. Are you overclocked? what are your CPU temps, what are you using to monitor them and what is your Vcore?

 

[loox]

Why will i uninstall my old anitvirus? will that help?

Not overclocked (have been), My cpu temp IDE is 32 C
The vcore is 1.134 (not changed from defucult).

 

[essenbe]

Set your Vcore in bios to 1.20. And please fill out your system specs. It helps us know what we are dealing with.

 

[saifz]

0x124 is hardware problem and most notable overclocks. set everything back to default in ur bios

 

[loox]

My system spec is

Asrock fatal1ty professional (updated)
Corsair ax 850w
Corsair vengance 4gb 1866mzh
Corsair vengance 4gb 1866mzh
Corsair h80
Corsair force 3 (have disconnected it and boot from usb no change, have the update to)
Msi geforce 560 ti (updated)
Nzxt phantom

all is defucult, but the vcore is now lower for some reason, only 1.0 v!

 

[essenbe]

You have to see what Vcore is in bios. Intel speedstep at idle reduces the frequency to 1.6 and lowers the Vcore to between .097- 1.13. You need to see what the Vcore is in bios or run prime to see where you are. With the K chips you are only oCing the turbo boost. To change the Vcore you need to set the Vcore to offset mode and increase or decrease the core in steps by using offset. What does bios say your vcore is? You need to set everything to default and Vcore to auto and run prime95, memtest86 and furmark. Those are stress tests. Your error codes are hardware related. You need to find out what hardware is causing problems. I would recommend to do it at default settings on everything. you have to find the error prone hardware, before you try to overclock. If you have error prone hardware, any overclock will fail.

 

[loox]

i get a new error message now, the error message is 0x0000004e. What does this mean? I have fully updated all my drivers, so maybe it's two problems. One is done, and this new is another one?

 

[loox]

New infomation

Hey i have been working new infomation to your guys, hope it will help you to help me!

· OS - Windows 7
· x64 (64bit)?
· What was original installed OS on system? I have only install my os windows 7 home premium
· It's a OEM license version
· My hardware is only 3 weeks old.
· My os is the same 3 weeks.

· CPU- Intel core i5 2500k
· Video Card - Msi geforce 560 ti
· MotherBoard - Asrock fatal1ty professional
· Power Supply - brand & wattage - Corsair ax 850w

· System Manufacturer - Build this computer on my own.

 

[pooch]

Hello loox

Why will i uninstall my old anitvirus? will that help?

Symantec has known problems with drivers, I would do as zigzag suggests, if the problem does not go after it is uninstalled, you can always reinstall Symantec.

Reading through the posts I would concentrate on a memory problem, if resetting the defaults in BIOS does not fix the problem, try removing one stick of RAM and see what happens. If the problem persists I would then try with just the other stick.

Also running memtest as suggested by essenbe is a good idea.

 

[loox]

Hello loox

Why will i uninstall my old anitvirus? will that help?

Symantec has known problems with drivers, I would do as zigzag suggests, if the problem does not go after it is uninstalled, you can always reinstall Symantec.

Reading through the posts I would concentrate on a memory problem, if resetting the defaults in BIOS does not fix the problem, try removing one stick of RAM and see what happens. If the problem persists I would then try with just the other stick.

Also running memtest as suggested by essenbe is a good idea.

The only thing i havent try is to uninstall the antivirus, i will do that and do a reboot and cheack if it works. Have been running memtest,stick 1 and just stick 2 no change with the BSOD. Any more ides?

Thanks for replays!