Solved random bsod when gaming and not doing anything

[shinzamiel]

can analyze these dump files
bsod in gaming (a lot)
bsod while doing nothing (rare )
got dxgmms1.sys bsod too

 

[FredeGail]

Hello shinzamiel & welcome.


First
Not much of experience, but seems like you have Driver Verifier enabled. Disable is as soon as possible!
Follow option 2 on this tutorial.

Tutorial.

Second
Possible memory freed. Run MemTest and post back your results.

Summary

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_VERIFIER_DETECTED_VIOLATION (c4)
A device driver attempting to corrupt the system has been caught.  This is
because the driver was specified in the registry as being suspect (by the
administrator) and the kernel has enabled substantial checking of this driver.
If the driver attempts to corrupt the system, bugchecks 0xC4, 0xC1 and 0xA will
be among the most commonly seen crashes.

Fred.

 

[shinzamiel]

ok i done memtest but got 1 error after 3 passes
disabled the Verifier will check now gaming
found that avira had bsod me too (avipbb.sys) ;p

 

[FredeGail]

ok i done memtest but got 1 error after 3 passes
disabled the Verifier will check now gaming
found that avira had bsod me too (avipbb.sys) ;p

Do you have any new BSoD to upload?

Fred.

 

[shinzamiel]

some of the old ones are there 2 new

 

[FredeGail]

:warn: Memory corruption

Try removing all except one stick and test that one stick, leave it for 7 passes at each slot. After the 7 passes, move the stick into another slot and so on. Keep doing this with the other sticks also. By that, we'll know which ones are freed.
If you can borrow some RAM-sticks from a friend, workmate, colleague, or a family-member it'll be great. Be sure it's the same socket.
And remember just because the MemTest gave errors at first at a specific slot- and wouldn't do it second time, certainly doesn't mean the stick or slot is free from errors.

Luckily, RAM ain't expensive, unless your have DDR2.

Fred.

 

[shinzamiel]

1. i live in syria even ddr3 are expensive lol
2.i cant rma anything (syria)
3. could it be that i put the two ram sticks as one channel not dual channel

 

[FredeGail]

1. i live in syria even ddr3 are expensive lol
2.i cant rma anything (syria)
3. could it be that i put the two ram sticks as one channel not dual channel

By default, you should place the RAM in the same socket color.

Fred.

 

[shinzamiel]

could it be that my ram is not stable on 1.5v
i use prime95 for hours with no bsod (have unlocked my x455)

 

[FredeGail]

could it be that my ram is not stable on 1.5v

Place the voltage on [DEFAULT] in your BIOS. Also the CLOCKS and so on. Everything on default.

Fred.

 

[shinzamiel]

default is 1.5v and read my edit plz

 

[FredeGail]

Have you done this?

The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.

 

[shinzamiel]

thanks for the advice fred no bsod until now

 

[FredeGail]

thanks for the advice fred no bsod until now

Nice.

Fred.