Started the new install in win 7 ultimate 64bit then freezes ,help

[bosanci28]

i have my computer:

i3 dual core 3200hmhz
mb: msi h55m-e23
8gb ram 1600 (4gb each)
windows 7 ultimate 64bit
cpu:intel r core tm i3 cpu 550 @ 3.20ghz

purchased the combo unit from tigerdirect in jan or april 2011.(here)

memory info:

CORSAIR XMS 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMX8GX3M2A1600C9
XMS3 - Xtreme Performance DDR3 Memory
SPD Latency: 9-9-9-24
Tested Latency: 9-9-9-24
Memory Type: DDR3
Speed Rating: PC3-12800 (1600MHz)
Tested Speed: 1600Mhz
>>>
purchased here.

power supply i have this one here
info:
SeaSonic SS-350ES active pfc f3
pso 350 watt 80 plus power supply.



so i had this error coming out :
today and few days ago sand the computer will just crash into a blue screen:

error: 9c
0000000000000000
fffff80000ba8bb0
0000000000000000
0000000000000000

so i decided to re-install windows fresh,

i put my windows 7 ultimate 64bit in and booted from it i got to the screen and click next,then agree ,chosse the hard (is only one 1tb),
and then the progress bar % come,,like 30sec the pc is getting frozen ...stock,
if i do it again same problem.


so,changed hard drive ,same problem,
all cables are out ,only keyboard and mouse ,
i checked the memory with memtest+ it pass 10. so that means is okay,
also tested each memory separate ,same problem.

so right now i have the dvd drive ,one hdd 1tb ,memory,thats all i have in my pc,
and i cant figure out why is it freezing on me all the time,the computer is clean ,no dust!

any help will appreciate!

happy holidays.

thanks...

bosanci28

 

[scrooge]

i found this on another site maybe it will help you.

BCCode 9c Useually means its a machine check exception. It may be caused by faulty CPU, Mother Board, or RAM.

I had to go to a Vtt of +250 on my system, and needed a CPUV of 1.375; regardless of what you try, Dont go above 1.4 or +300, as that will take you out of the safe range. also look at your temps, No core , or anything else for that matter , should ever go above 85, with IBT or LinX, and some use 75 as their guide.

scrooge

 

[bosanci28]

hmmm,thanks

i have purchased this as a combo from tiger direct and it had mb+cpu installed plus power supply too,

so i suspect that cpu or mb are bad,memory passed test,

i may change a new power supply with higher watts,and see what will happen.

thanks

bosanci28

 

[AddRAM]

Are you saying your only waiting 30 seconds and you think it`s freezing up ? That progress bar could take up to 2 minutes to show progression. Do you have any XP discs you could test the pc with?

 

[bosanci28]

hi,

well is freezing just at starting the install even at first steps
see screen:

i also purchased a 600watts power supply .

Also i will try a windows xp too,i even try win 7 ultimate 32bit still same problem.

thanks

bosanci28

 

[scrooge]

not sure if you have a seting for the ( a drive) in your bios but i remember having a motherboard that would stop like that and it turned out it was the (a drive) it was enabled in the bios so when windows was being installed it would just stop for like 5 to 10 mins looking for the drve. but i didn't have one in the system . i disabled it and all was fine after that.


scrooge

 

[bosanci28]

you mean the floppy drive?

because i dont have one on the case,but it may be in bios a setting,i have to check,

also i have installed the new power supply and same problem,

i am installing windows pro now and is at 35 minutes left and it froze on me at installing devices,wow,hmmm interesting,

,i have to check about that drive a to see maybe from there, weird problems.

just to add when it froze s the reset button does not works it looks like it restarts itself after whatever.



thank you friend for your advice!


regards,

bosanci28

 

[bosanci28]

also i see in bios
cpu temp at 86'f
system temp at 77'f
cpu fan speed at 3560 rpm
cpu vcore 1.224v
gpu vcore 1.128 v
3.3v at 5.045 v
12v at 12.056

and this mother board does not have drive a.

thanks

 

[AddRAM]

Your BIOS is probably fine, but for the heck of it, make sure your cdrom is set for 1st boot, your hard drive set for 2nd boot and disable the last 1 or 2. And make sure your hard drive shows up in the BIOS.

Is this a real disc your using or an ISO ?

 

[scrooge]

how about your voltage setting on your memory on the link it says (Tested Voltage 1.65 ) is that what you have ?
sometimes just bumping your cpu or memory voltage up just a bit can make your system more stable.
you can try it and if it don't work change it back.

scrooge

 

[bosanci28]

Your BIOS is probably fine, but for the heck of it, make sure your cdrom is set for 1st boot, your hard drive set for 2nd boot and disable the last 1 or 2. And make sure your hard drive shows up in the BIOS.

Is this a real disc your using or an ISO ?

i have :

sata1 for dvd drive
sata6 for my hdd
all other are empty.

as for boot sequence this is what i have:
1usb generic
2usb generic
3usb generic
4usb generic
5 sata hdd
6 dvd drive

i have changed to
1 dvd drive
2 hdd
all other disable.

the hdd shows there in bios.

the win 7 ultimate is legit purchased from store with key 64bit and 32 bit disks.

thanks

 

[bosanci28]

how about your voltage setting on your memory on the link it says (Tested Voltage 1.65 ) is that what you have ?
sometimes just bumping your cpu or memory voltage up just a bit can make your system more stable.
you can try it and if it don't work change it back.

scrooge

how do i check that in bios?or where ,hmmm dont see that option on the voltage,
thanks

 

[AddRAM]

Give it a go and see what happens.

I wouldn`t mess with any voltage changes until you get this cleared up 1st.

 

[bosanci28]

Give it a go and see what happens.

I wouldn`t mess with any voltage changes until you get this cleared up 1st.

no luck,still freezing on install,gets stuck then after about 1-2 minutes shuts down then restarts.



i have found the settings for dram voltage witch are set on auto right now and they are
at 1.630 v
min:0.978v to max:1.898v

thanks

 

[AddRAM]

Could it possibly be your dvd drive?

Also, you should connect the hardrive to the sata 2 connector.

 

[bosanci28]

hmm,that can be a possibility but it worked fine before this happen.

 

[bosanci28]

other question for !

i have notice on my memory ram it say:

corsair
1600mhz 8gb(2x4gb) 9-9-9-24 1.65v ver2.12

now when i look in bios the voltage is on auto at 1.630v ,normally it should be at 1.650 v ?

and i see this too in bios under memory-z at "current dram channel 1 timing is at 7-7-7-20 and on the memory

sticks it say : 9-9-9-24

any clue?

thanks

 

[scrooge]

have you tryed removing 1 stick of ram to see what happens?

scrooge

 

[theog]

Take a look at these posts:
http://www.sevenforums.com/tutorial...stallation-errors-troubleshoot-step-step.html
http://www.sevenforums.com/installa...on-installation-problems-their-solutions.html
http://www.sevenforums.com/installation-setup/28129-questions-use-help-installation-issues.html
http://www.sevenforums.com/installa...ck-reference-list-installing-windows-7-a.html

 

[bosanci28]

have you tryed removing 1 stick of ram to see what happens?

scrooge

no luck,i tried,
i even buy new 1333 2gb to test ,and still same problem,freezes at setup then shuts down.

also put new dvd drive ,same problem.

flashed bios to the new firmware same problem,

at this point i dont know ,what is it,

i will try to install win xp with all this new stuff installed to see if will it go,



thanks