Help speed your video card settings

[Il Gerry]

Hello I wanted to know if anyone could give me help: Cry: for my graphics card,
in menus' under-performance GPU-Power I am asked to insert the CPU processor speed from 800 MHz to 2100 MHz, but I do not know what is best for my notebook an Acer Aspire 5552G with AMD Phenom II X3 N830 with an AMD Radeon HD 6650M and the OS Windows 7 64bit and 4GB Ram 750GB HDD.
I use the GPU for recolare
The AMD Vision Engine Control Center ver.2011 .1025.2231.38573.
Thanks to all who can give me ideas.: Banghead:

 

[greenwizard]

2100 MHz

 

[Il Gerry]

Greenwizard Hello and thank you for your interest in the effects of the CCC panel shows me 2100 MHz maximum clock as though I was interested to know if I have to keep it so maybe not game and even when I do things more 'simple (like browsing the Internet or write to World).
And then could you tell me where I can do a "course" for accelerated learning to use the best of my HD 6650m.
Thanks for the patience and availability, and Happy New Year.

 

[stormy13]

2100 MHz would be severely overclocking the GPU. Might want to just leave that on its defaults unless you want to fry the video card in your laptop.

 

[Il Gerry]

With holy words! I think so it was just a "whim" but since the personal computer is better again not too dirty because yesterday I had a "****ing" bluescreen someone could clarify on what might have happened? I also open a post to the Driver section (http://www.sevenforums.com/drivers/205797-support-irresolvable-damn-bluescreen.html # post1725197) Help friends!

 

[Il Gerry]

So what should I set the CPU power supply for my Acer AMD Phenom II X3 N830 and a video card AMD Radeon HD 6650M? We accept consigli.Ciao

 

[stormy13]

Nothing. Set it to the defaults and forget that those settings are there.

 

[Il Gerry]

Hello you but what is the default Radeon HD 6650 as the M button ... do not restore the default AMD Engine Control Center ver.2011 .1025.2231. 0.38573
Mo I do? Help me please
Bye

 

[stormy13]

Default speed of that CPU is 2100,

AMD Phenom II N830 processor - HMN830DCR32GM

Set the sliders back so that it shows the top speed as 2100 MHZ, and then like i said, leave it alone.

 

[Il Gerry]

Hello stormy13 and especially thanks for the clarification now finally I realized it's OK : D
2100 Mhz is not much as like reading too much is in your AMD Phenom II N830 processor - HMN830DCR32GM Default
Thanks again and closed the problem!: D: D

 

[Solarstarshines]

Nothing. Set it to the defaults and forget that those settings are there.

That's the best advice +1

Laptops have no room for that sorta business unless you like to burn money and throw it away

 

[Il Gerry]

Hello and sorry for my late reply, now I had to reformat everything and I came back at the CCC as the original when I say that comperatra upgrade the drivers since I seem to have version 8.? and hence the CCC, or leave everything as is and lies? I could also put qulcos'altro like Riva or ATI Tray Tools Bo ... I still doubt that you say?
Meanwhile, thanks to the availability
Hello.