Solved Either my monitor or graphics card is failing... but which is it?

[Duncan]

Hi,

It seems that when I turn on my computer or wake it up from a sleep the image on the screen is vibrating / quivering ever so slightly. However after a minute the image has completely stabilized.

My monitor is a xerox XA7 lcd display which is now 7 years old. My graphics card is a secondhand nVidia GeForce 8600 GT.

What's interesting is that I have an LED TV hooked up to the HDMI out on the graphics card and the image on the TV is always perfect.

So is it my xerox monitor that is failing? Or could it be that just the DVI on the graphics card is failing and the HDMI is fine?

Thanks for your expertise!

 

[linnemeyerhere]

Duncan,
Can you borrow a friends monitor and test it with your card? Also make and un-make the connections to the card to the monitor to clean and refresh their connections and report back.

 

[dsperber]

If your monitor was an old CRT (as mine was), I would definitely say that your "vibrating" symptom was the monitor itself. I would have to hit the power button to turn the CRT off, let it sit for 15-30 seconds, then power it back on, and it would be alright... for another few minutes or hours or days.

And periodically the "rash" of vibrations would happen repeatedly, and then it would go away for a week.

And as with your story, it was more likely to happen when the monitor came out of power-save mode or when I just turned on the machine and monitor and the CRT hadn't fully warmed up yet.

Anyway it was clearly the old CRT dying. I've now replaced it with a large LCD and of course the problem has disappeared. It was NOT the video card. It was the monitor itself.


But LCD monitors don't work the same way as CRTs. Nevertheless, I would guess it's your old LCD monitor which is failing, not the video card.

You could try the power-off/wait/on sequence I described above, instead of waiting your usual 1-minute after waking up. If these kinds of tricks also solve your problem I would have to speculate it was the monitor that was failing, not the video card.

Video card failures tend to have different kinds of symptoms... such as an array of green spots or square-pixels uniformly distributed over the screen, etc. But the kind of symptom you describe would be a monitor issue, is my guess.

 

[Duncan]

Thanks for the replys people!

I just turned my monitor off for 20mins or so, but kept the machine awake by periodically wiggling the mouse. Then I turned back on the monitor and sure enough the image was quivering ever so slightly.

So I think that is probably proof that it's the monitor!

I'm asuming that the graphics card is not aware if the monitor is off and was therefore still active all the time the monitor was off thereby eliminating it from the equation.

It would be a nice power saving feature if the graphics card did go so sleep when the monitor is not on and it is not being used. But I'm assuming that this is not the case.

Also thanks for the tip about reconnecting the dvi, I did this but it has not resolved the issue.

 

[TBoyd]

Just one thought, which you probably already have checked, but just in case....

Your Xerox XA7 more than likely has a different native screen resolution that your LED TV. When you switch from the TV to the monitor, are you certain that the Xerox is set to its native resolution?

I suppose you are using the NVIDIA Control Panel to be sure. Check the resolution and the refresh rate.

 

[Duncan]

Yes it is definately at it's native resolution and refresh rate, thanks for the idea though.

 

[linnemeyerhere]

One last thought that you can try because it always works for me.

Step 1) Pick up the device in question and throw it across the room.
Step 2) If it breaks then go out and purchase a brand new item, problem solved.
Step 3) If it doesn't break repeat step #1 till it does.

See you feel better and you've helped stimulate the economy just a little !

 

[TBoyd]

One last thought that you can try because it always works for me.

Step 1) Pick up the device in question and throw it across the room.
Step 2) If it breaks then go out and purchase a brand new item, problem solved.
Step 3) If it doesn't break repeat step #1 till it does.

See you feel better and you've helped stimulate the economy just a little !

Now that all possibilities have been covered, that is probably the best solution! :sarc:

 

[A Guy]

When you turn it on and it quivers, see if the monitors own OSD (On Screen Display), like a menu, also quivers. If it does, it's the monitor. If the video in the background quivers, but the OSD does not, it's the video source. A Guy

 

[Duncan]

One last thought that you can try because it always works for me.

Step 1) Pick up the device in question and throw it across the room.
Step 2) If it breaks then go out and purchase a brand new item, problem solved.
Step 3) If it doesn't break repeat step #1 till it does.

See you feel better and you've helped stimulate the economy just a little !

Haha, thanks for the suggestion!!

Unfortunately I think my landlord would object to a monitor shaped dent in the wall. But maybe I could throw it out the window..?.

 

[linnemeyerhere]

Duncan,
Yes windows work exceptionally well especially when on higher than 1st floors. I suggest this carry method to add drama to the task.

 

[Duncan]

When you turn it on and it quivers, see if the monitors own OSD (On Screen Display), like a menu, also quivers. If it does, it's the monitor. If the video in the background quivers, but the OSD does not, it's the video source. A Guy

A Guy, thanks for this suggestion. I have tried this and actually the OSD seemed stable. But does this necessarily mean that it isn't the graphics card? Surely the OSD would be the layered over the image just before it appears on screen. Could there not be other electronics that the image is passing through before the OSD gets layered?

The experiment I did earlier of keeping the machine active before I turned the monitor on and the monitor when turned on still vibrating would indicate that the issue is the monitor.

Thanks for the help

 

[Duncan]

Duncan,
Yes windows work exceptionally well especially when on higher than 1st floors. I suggest this carry method to add drama to the task.View attachment 197109

haha nice!

 

[A Guy]

It's possible the monitor has an issue before the OSD is injected into the video, but generally for jitter, etc. It will be a good test. Another monitor hooked up, or yours hooked up to another PC would be the best test. If it quivers for a while after turned on, you might try a hair dryer on it, see if it stops faster. A Guy

 

[Duncan]

Update

***UPDATE****

I now have a new monitor and can confirm that it was the old monitor that was at fault.

After reading several reviews I have gone for a very nice NEC-EA232WMI 23" IPS monitor!

 

[linnemeyerhere]

Duncan,
Thanks for the update and I'm sure that new monitor is sweeeet !