Can't access routers webpage / control page anymore.

[Danko]

Hello,
I noticed a few days ago that I cant access my router anymore "http://192.168.1.1/"
I had some network problems so I uninstalled hamachi.

http://www.sevenforums.com/network-...t-24mbps-connection-crashes-every-10mins.html

There's the thread I made, and all of the changes I did I posted there. So if you read the thread. When I got back home and after few days I noticed that I can't connect to the router anymore. ipconfig just displays some random "85.157.0.1" which doesn't work.

Thanks in advance.

 

[bassfisher6522]

Try resetting the router to factory defaults. There should be a hole or reset button on back of router and follow manufacturers instructions on how to reset router to factory defaults. This should allow you to access your routers web based page again and then re-setup router again.

 

[Dwarf]

A quick tip here, should you find yourself in the same (or similar) situation again. This should work for all routers. See your router manual for full instructions.

Once you have got the router set up and configured, save all the settings to a file on your computer. There is generally a page/tab within the router settings that allow you to save all settings to a file, which you can reload later in order to restore/reset the router configuration. This comes in useful if you ever upgrade the router firmware, as this will return the router to factory condition.

 

[Danko]

Ive reset it but I noticed no change. I'll check with the manual.

 

[Dwarf]

See if the following batch file helps:

@Echo on
pushd\windows\system32\drivers\etc
attrib -h -s -r hosts
echo 127.0.0.1 localhost>HOSTS
attrib +r +h +s hosts
popd
ipconfig /release
ipconfig /renew
ipconfig /flushdns
netsh winsock reset all
netsh int ip reset all
shutdown -r -t 1
del %0

Copy and paste the above in to Notepad and save it as Flush.bat to the desktop. Close all running applications and then right-click on the file and choose to run as an administrator, providing the necessary credentials when prompted. Your computer will automatically restart itself.

 

[Danko]

Ok, so I run that but nothing happened. Same info on the ipconfig.
I tried on my laptop and it can access the router, any more suggestions?

 

[chev65]

Ok, so I run that but nothing happened. Same info on the ipconfig.
I tried on my laptop and it can access the router, any more suggestions?

I'd like to see a screen shot of the ipconfig/all.

 

[Danko]

https://dl.dropbox.com/u/54712772/iconfig.jpg

It's in finnish. Kyllä = Yes
No = Ei

 

[chev65]

https://dl.dropbox.com/u/54712772/iconfig.jpg

It's in finnish. Kyllä = Yes
No = Ei

Well your a long ways from your original default gateway. I'm not sure where these IP's are coming from but it sure doesn't look right to me.

I'd reset the router completely at this point, I remember you now. I guess uninstalling Hamachi didn't fix the problem yet? It looks like those IP's are stuck in your Nvidia adaptor for some reason.

Have you tried reinstalling the Nvidia driver?

You should also try putting the DNS servers into the routers settings instead of static DNS. I'm not sure where those DNS servers came from but something seems strange there. I'm trying to figure out where the heck all those 85. IP's are coming from.

Make sure the IPv4 properties doesn't have anything input into it other than DHCP enabled.

The router should work with a complete reset, holding in reset button for 30 seconds, then unplug router while still holding down button for 30 more seconds, then plug back in and hold for 30 more seconds and finally release button.

I still can't figure out where those 80. IP's are coming from, maybe your modem because the router doesn't appear to be doing anything at this point.

 

[Danko]

I have reset it twice now. Nothing happens.