Solved Warning's in Dev Man and Devices and Printers

[xXSevenXx]

I recently installed an SSD, I changed everything to ACHI in the bios, I'm now getting warnings in the following places.
Is anything wrong?

 

[x BlueRobot]

Do the yellow warnings have any code numbers or error codes associated with them?

Go to device manager:

Right-Click device with yellow triangle > Properties > Device status area

You should find a error code within the device status area, which will help people on the forums, fix any associated problems.

Hope this helps,

Harry

 

[xXSevenXx]

Do the yellow warnings have any code numbers or error codes associated with them?

Go to device manager:

Right-Click device with yellow triangle > Properties > Device status area

You should find a error code within the device status area, which will help people on the forums, fix any associated problems.

Hope this helps,

Harry

Okay, here's a couple of screenshots.

 

[x BlueRobot]

Okay, as you can see, you will need to visit the manufacturer's website and download the drivers for that device, which in turn will allow Windows to recognise the device properly and allow you do use it.

This tutorial should help you: http://www.sevenforums.com/tutorials/97061-driver-install-device-manager.html

I believe this is your manufacturer's website: http://www.drivermanager.com/en/dri...Logo=marvell&gclid=CNrftcbeq7ICFUdvfAodzVsA4Q

Hope this helps,

Harry

 

[xXSevenXx]

Okay, as you can see, you will need to visit the manufacturer's website and download the drivers for that device, which in turn will allow Windows to recognise the device properly and allow you do use it.

This tutorial should help you: http://www.sevenforums.com/tutorials/97061-driver-install-device-manager.html

Hope this helps,

Harry

I'm not using anything with Marvel, it's ACHI.
I forgot to add that is the same code for my USB fault/warning.

 

[x BlueRobot]

Free Download Marvell 91xx AHCI RAID Controller Drivers

The problem is with the driver controller, and what did you change, to make the USB drivers missing?

 

[x BlueRobot]

Try this tutorial for the missing USB drivers: http://www.sevenforums.com/tutorials/165554-usb-driver-general-fix-problems.html?filter

Hope this helps,

Harry

 

[xXSevenXx]

Try this tutorial for the missing USB drivers: http://www.sevenforums.com/tutorials/165554-usb-driver-general-fix-problems.html?filter

Hope this helps,

Harry

Still no joy.
If you see the screenshot in my first post, that USB warning is in "other devices".

 

[xXSevenXx]

Down sized

Pardon!!:huh:

 

[x BlueRobot]

Is your SDD called OCZ Vertex 4? What is the manufacturer?

 

[xXSevenXx]

Is your SDD called OCZ Vertex 4? What is the manufacturer?

OCZ is the name of the manufacturer.

 

[x BlueRobot]

Is your SDD called OCZ Vertex 4? What is the manufacturer?

OCZ is the name of the manufacturer.

Okay, thank you, but when you brought the SDD did they provide any DVD-ROMs with the hard-drive?

The problem is, missing drivers for the SDD controllers, and you can download these from the OCZ's website.

 

[x BlueRobot]

Have you tried updating the SDD with the latest firmware?

Perform a Backup on a separate drive beforehand.

OCZ Technology

 

[x BlueRobot]

For the USB controllers, try reading this article: USB Controller Missing

The last post is the best option in my opinion.

Hope this helps,

Harry

 

[xXSevenXx]

Hi apparently drivers are not required for my SSD, I have the latest firmware and I have updated my BIOS.
Now I have to install "Intel's RST", I'm waiting for a link from another site, just to make sure I install the correct software.

 

[xXSevenXx]

Hi I have solved the USB issue, I installed a Nec driver for USB 3.0.

 

[x BlueRobot]

Okay, glad you were able to resolve your problem