BSOD, hal.dll & ntoskrnl.exe

[Montop20]

Ive had two pretty much random BSOD where I have just been browsing the internet and the other was while I was gaming (League of Legends). I have the two dump files and all the other files that SF Diagnostics pulled.

 

[Skylais]

X64_0x124_GenuineIntel :
http://www.sevenforums.com/crash-lockup-debug-how/35349-stop-0x124-what-means-what-try.html

This is a hardware issue just about everytime. If your overclocking stop, and revert. Clean out your system of dust, and follow the link above for the most likely solution to this problem.
IF you would like run these stress test to help diagnose and rule out the issue.
Stresstests:
Ram : http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html
General hardware: http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html ( (Three pre-set configurations are available: Small FFTs and In-place FFTs, and Blend. Small and In-place modes primarily test the FPU and the caches of the CPU, whereas the Blend mode tests everything, including the memory.)
Graphics: http://www.sevenforums.com/tutorials/100356-video-card-stress-test-furmark.html (Do the above Graphics test only with the latest drivers, and then Run it until the temperatures stop increasing; should be less then 10 minutes. If you don't see any crazy glitches or distortion on the screen, The test most likely passed. Take note if the Temperature gets too high, or you see Visual artifact - Wikipedia, the free encyclopedia to stop the test.)
Also run and upload the latest dumps, you gain from using this : Driver verifier: http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html
Please update your specs here. : System info update : http://www.sevenforums.com/tutorials/180324-system-info-see-your-system-specs.html
System specs page: http://www.sevenforums.com/profile.php?do=extra

 

[Montop20]

X64_0x124_GenuineIntel :
http://www.sevenforums.com/crash-lockup-debug-how/35349-stop-0x124-what-means-what-try.html

This is a hardware issue just about everytime. If your overclocking stop, and revert. Clean out your system of dust, and follow the link above for the most likely solution to this problem.
IF you would like run these stress test to help diagnose and rule out the issue.
Stresstests:
Ram : http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html
General hardware: http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html ( (Three pre-set configurations are available: Small FFTs and In-place FFTs, and Blend. Small and In-place modes primarily test the FPU and the caches of the CPU, whereas the Blend mode tests everything, including the memory.)
Graphics: http://www.sevenforums.com/tutorials/100356-video-card-stress-test-furmark.html (Do the above Graphics test only with the latest drivers, and then Run it until the temperatures stop increasing; should be less then 10 minutes. If you don't see any crazy glitches or distortion on the screen, The test most likely passed. Take note if the Temperature gets too high, or you see Visual artifact - Wikipedia, the free encyclopedia to stop the test.)
Also run and upload the latest dumps, you gain from using this : Driver verifier: http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html
Please update your specs here. : System info update : http://www.sevenforums.com/tutorials/180324-system-info-see-your-system-specs.html
System specs page: http://www.sevenforums.com/profile.php?do=extra

Alright thanks I try these out and see what happens and keep you posted if I get no results I'll try and mess with my voltage settings!

-Montop

 

[Skylais]

Sounds great, lets hope we can get this thing fixed! Anyhow i am going to sleep, good luck for now. I'll be glad and so will others to help you on these forums