HHDMI: No signal when system is off.

wkw427

New member
Member
VIP
Local time
1:13 PM
Messages
135
I have a samsung smb2330h and just hooked it up with hdmi. I have been using dvi in the past, with the same pc..

When I leave the computer idle, the screen shuts off and goes into sleep mode
When I shut down, the screen shuts off and goes into sleep mode, UNTIL the system power is off. Then it says no signal.

When I go to hibernate the computer, the monitor says no signal.
When the computer is off, the screen says no signal.


Any ideas how to fix this?
 

My Computer My Computer

At a glance

XP, 7 32/64biti5 2500k, variousEnough560
Computer Manufacturer/Model Number
Myself
OS
XP, 7 32/64bit
CPU
i5 2500k, various
Motherboard
Gigabyte ga z68xp-ud3
Memory
Enough
Graphics Card(s)
560
Hard Drives
Far too many to keep track of
Internet Speed
Faster than yours, maybe.
Stick to DVI if it works properly. There is nothing to gain from using HDMI unless the monitor has speakers and you are using HDMI for audio as well as video.
 

My Computer My Computer

At a glance

Win 7 Ultimate x64FX-8350 @ 4.6 GHz so farADATA XPG V1 Series Black 8GB DDR3 1600Sapphire R9 270x Dual-X
Computer type
PC/Desktop
Computer Manufacturer/Model Number
Me
OS
Win 7 Ultimate x64
CPU
FX-8350 @ 4.6 GHz so far
Motherboard
Asus M5A97 EVO
Memory
ADATA XPG V1 Series Black 8GB DDR3 1600
Graphics Card(s)
Sapphire R9 270x Dual-X
Sound Card
Xonar DGX w/ Corsair Vengence 1300
Monitor(s) Displays
Acer S232HL Abid
Screen Resolution
1920x1080
Hard Drives
120 GB OCZ Vertex 3
500 GB Seagate 7200.12
PSU
Antec Earthwatts 650W Green
Case
Antec Three Hundred
Cooling
Cooler Master 212 EVO
Keyboard
Logitech G510
Mouse
Logitech G500s
Internet Speed
35000/3000
The monitor doesn't have speakers, but a headphone passthrough. I don't have a headphone jack on my Pc, so I was previous just plugging my headset into the back of my PC.. Which wasn't ideal.

I know I'm going to have to switch back, but I'd realy like to know why it is doing this
 

My Computer My Computer

At a glance

XP, 7 32/64biti5 2500k, variousEnough560
Computer Manufacturer/Model Number
Myself
OS
XP, 7 32/64bit
CPU
i5 2500k, various
Motherboard
Gigabyte ga z68xp-ud3
Memory
Enough
Graphics Card(s)
560
Hard Drives
Far too many to keep track of
Internet Speed
Faster than yours, maybe.

My Computer My Computer

At a glance

Win 7 Ultimate x64FX-8350 @ 4.6 GHz so farADATA XPG V1 Series Black 8GB DDR3 1600Sapphire R9 270x Dual-X
Computer type
PC/Desktop
Computer Manufacturer/Model Number
Me
OS
Win 7 Ultimate x64
CPU
FX-8350 @ 4.6 GHz so far
Motherboard
Asus M5A97 EVO
Memory
ADATA XPG V1 Series Black 8GB DDR3 1600
Graphics Card(s)
Sapphire R9 270x Dual-X
Sound Card
Xonar DGX w/ Corsair Vengence 1300
Monitor(s) Displays
Acer S232HL Abid
Screen Resolution
1920x1080
Hard Drives
120 GB OCZ Vertex 3
500 GB Seagate 7200.12
PSU
Antec Earthwatts 650W Green
Case
Antec Three Hundred
Cooling
Cooler Master 212 EVO
Keyboard
Logitech G510
Mouse
Logitech G500s
Internet Speed
35000/3000
Sorry, I haven't updated it.. With my case, I do not have audio jacks on the front =.=
 

My Computer My Computer

At a glance

XP, 7 32/64biti5 2500k, variousEnough560
Computer Manufacturer/Model Number
Myself
OS
XP, 7 32/64bit
CPU
i5 2500k, various
Motherboard
Gigabyte ga z68xp-ud3
Memory
Enough
Graphics Card(s)
560
Hard Drives
Far too many to keep track of
Internet Speed
Faster than yours, maybe.
I have a samsung smb2330h and just hooked it up with hdmi. I have been using dvi in the past, with the same pc..

When I leave the computer idle, the screen shuts off and goes into sleep mode
When I shut down, the screen shuts off and goes into sleep mode, UNTIL the system power is off. Then it says no signal.

When I go to hibernate the computer, the monitor says no signal.
When the computer is off, the screen says no signal.


Any ideas how to fix this?

This is normal operation for HDMI. VGA and DVI (FOR COMPUTERS) contain switching signals to tell the monitor to go into standby. There are no such signals in HDMI. Don't forget HDMI is used to connect multiple video devices to home TV sets and those users would not be happy if their Home Theater TV shut down to standby once the PC went to sleep or the Blu ray finished. You do not have an issue. :geek:
 

My Computer My Computer

At a glance

Windows 7 x64 Ultimate and numerous virtual m...AMD FX-8350 Vishera 32nm Technology @ 4.2 GHz...G Skill 32.0GB Dual-Channel DDR3 @ 1204MHz (1...EVGA GeForce GTX 960 4GB Super SC ACX 2.0+ wi...
Computer type
PC/Desktop
Computer Manufacturer/Model Number
Bluethunder II
OS
Windows 7 x64 Ultimate and numerous virtual machines
CPU
AMD FX-8350 Vishera 32nm Technology @ 4.2 GHz default
Motherboard
ASUSTeK COMPUTER INC. SABERTOOTH 990FX R2.0 (Socket 942)
Memory
G Skill 32.0GB Dual-Channel DDR3 @ 1204MHz (11-13-13-31)
Graphics Card(s)
EVGA GeForce GTX 960 4GB Super SC ACX 2.0+ with Back Plate
Sound Card
Creative X-Fi Titanium HD Audiophile PCIe
Monitor(s) Displays
LG L227WTG x 3
Screen Resolution
1680 x 1050 16:10
Hard Drives
238GB Samsung850 PRO SATA Disk Device (SSD)
1863GB Seagate ST2000DM 001-1CH164 (SATA)
1397GB Seagate ST1500DL 003-9VT16L(SATA)
466GB Western Digital WDC WD50 03AZEX-00K1GA0 (SATA) x 2
932GB Seagate ST310005 28AS SATA Disk Device (SATA)
PSU
Enermax Revolution87+ 1000 Watts Gold Certified Power Supply
Case
Rocketfish Full Tower
Cooling
Cooler Master Hyper 212 EVO Push Pull 120mm Fans
Keyboard
Logitech K740
Mouse
Logitech G100S Laser LED + Logitech Gamepad F310
Internet Speed
500 mbs down and 30mbs up
Antivirus
Malwarebytes Pro & Avast and MSE on certain Virtual Machines
Browser
Firefox (Main) Chrome, Internet Explorer (Back Up)
Other Info
Logitech X 230 2.1 Stereo System and 5.1 Yamaha RX V2090
B&W DM6 Monitor Speakers + Center and Surround Speakers
Using Mouse Without Borders (Google it)
Back
Top