Show Us Your Rig [5]

[paulpicks21]

That looks very good NoN, a real professional job there, good work!

Obviously it's not as cool as my case mod tho :roflmao:

 

[NoN]

That looks very good NoN, a real professional job there, good work!

Obviously it's not as cool as my case mod tho :roflmao:

Yeah, tape of that type i used a lot aswell!

 

[ganjiry]

I was looking at my rig earlier and noticed I still had a "Powered by EVGA" badge on the side panel. Obviously I am no longer running EVGA so I hatched a cunning but perfectly executed plan to modify my case with the least amount of hassle.

And it's with great pleasure I attach a picture of the end result

Propper pro job there mate, :roflmao:

Did some paint job lately and pick up the theme from the Thermaltake Fluorescent Blue front panel (can't help myself!).

Painted with spray Fluorescent blue the top mesh, and fan dust cover on left side and parts of the feets aswell.

Parts had been prepared with a special spray paint to help get the final FB coat being sticky on it

Looking good NoN, Nice job

 

[paulpicks21]

That looks very good NoN, a real professional job there, good work!

Obviously it's not as cool as my case mod tho :roflmao:

Yeah, tape of that type i used a lot aswell!

I bet you did! It turned out real nice! I bet you are pleased with it.

 

[paulpicks21]

I was looking at my rig earlier and noticed I still had a "Powered by EVGA" badge on the side panel. Obviously I am no longer running EVGA so I hatched a cunning but perfectly executed plan to modify my case with the least amount of hassle.

And it's with great pleasure I attach a picture of the end result

Propper pro job there mate, :roflmao:

Did some paint job lately and pick up the theme from the Thermaltake Fluorescent Blue front panel (can't help myself!).

Painted with spray Fluorescent blue the top mesh, and fan dust cover on left side and parts of the feets aswell.

Parts had been prepared with a special spray paint to help get the final FB coat being sticky on it

Looking good NoN, Nice job

Thanks Ryan, it's a proper Job mate, no expense spared, I knew you would like it!:roflmao:

 

[NoN]

Thank you! Liked that a lot..even if it is a little modding. Wanted to have a case more happy to look at.
Might also use the plain right panel to paint a design...thinking of what i would like.

Ps: it does looks pretty bright under the speedlight, but it is a little more discrete in natural light.

 

[essenbe]

No modding here. Just some stuff dropped off at my house a few minutes ago. Oh, and in case nobody can figure it out, I'm no photographer, don't even play one on TV.

 

[paulpicks21]

It's ok Steve, photos look fine, sabertooth is a cracking board, it's so TUF the pins cannot and will not bend lol. I take it you have checked for bent ones already?

 

[NoN]

Sabertooth looks pretty nice & powerful motherboard. Choosing the components with not so colored others colors might be a little tricky. It used to be ceramica Tuf design...what kind of coating they do use now?

 

[paulpicks21]

I have the same Mobo NoN, it seems to blend in well with anything on the Z77 as the colors are covered by the components.


I know you will love it Steve.

 

[essenbe]

It's ok Steve, photos look fine, sabertooth is a cracking board, it's so TUF the pins cannot and will not bend lol. I take it you have checked for bent ones already?

No, I haven't mustered up the courage yet.

 

[COMPUTIAC]

I was looking at my rig earlier and noticed I still had a "Powered by EVGA" badge on the side panel. Obviously I am no longer running EVGA so I hatched a cunning but perfectly executed plan to modify my case with the least amount of hassle.

And it's with great pleasure I attach a picture of the end result

It's a very, ahh, umm, professional tape application you did there

No, I really mean it, it looks, very nice ?

 

[paulpicks21]

Updated pic, as I am back up to 16GB of Ram now. (Low light though).

 

[paulpicks21]

I was looking at my rig earlier and noticed I still had a "Powered by EVGA" badge on the side panel. Obviously I am no longer running EVGA so I hatched a cunning but perfectly executed plan to modify my case with the least amount of hassle.

And it's with great pleasure I attach a picture of the end result

It's a very, ahh, umm, professional tape application you did there

No, I really mean it, it looks, very nice ?

Thanks Bob, it really pays to spend the money on such mods. A bit like not skimping on a PSU. It's all worth it in the end

 

[NoN]

Updated pic, as I am back up to 16GB of Ram now. (Low light though).

Pretty nice with raspberry dram color!

 

[paulpicks21]

It's ok Steve, photos look fine, sabertooth is a cracking board, it's so TUF the pins cannot and will not bend lol. I take it you have checked for bent ones already?

No, I haven't mustered up the courage yet.

I have a good feeling about this one Steve. Keep us posted OK.

 

[paulpicks21]

Updated pic, as I am back up to 16GB of Ram now. (Low light though).

Pretty nice with raspberry dram color!

I don't think the low light and my camera flash gives a very good shot. This is the actual Ram - TridentX - F3-2400C10D-8GTX - G.SKILL DDR3 Memory

 

[NoN]

Updated pic, as I am back up to 16GB of Ram now. (Low light though).

Pretty nice with raspberry dram color!

I don't think the low light and my camera flash gives a very good shot. This is the actual Ram - TridentX - F3-2400C10D-8GTX - G.SKILL DDR3 Memory

I use this brand aswell, and i will surely choosen as you did those sticks in this color! Nice how it can be removable radiators on tops.

 

[COMPUTIAC]

Wow, nice bright red !

 

[paulpicks21]

Pretty nice with raspberry dram color!

I don't think the low light and my camera flash gives a very good shot. This is the actual Ram - TridentX - F3-2400C10D-8GTX - G.SKILL DDR3 Memory

I use this brand aswell, and i will surely choosen as you did those sticks in this color! Nice how it can be removable radiators on tops.

Yeah very useful if you have a tight situation with an air cooler.