Solved BSOD Randomly, ntoskrnl.exe

[Lorry]

Okay I deleted Intel device named;

• Intel(R) 8 Series/C220 Series SATA AHCI Controller - 8C02
  

But after restarting my computer it installed itself right away. I made a 7 pass memtest but if you need 8 pass yea sure i can do it. I downloaded SSD Toolkit for sandisk and it says my firmware is up to date. BTW I already installed Intel® Iris™ and HD graphics Driver for Windows 7 and since i downloaded it no bsods so far. Except the one about my external drive, so i unplugged my extrenal and plugging it whenever i need it.

And this is what it looks like after restart(It's keeps installing itself)

 

[Arc]

Intel(R) 8 Series/C220 Series SATA AHCI Controller will be reinstalled itself at reboot, but with a different driver, mashci.sys; not iastorv.sys.

Now observe how everything is going. Let us know the situation.

 

[Lorry]

Okay, thank you for everything I'll keep you guys updated.

 

[ICIT2LOL]

My two cents I know this is a new build but no one that I can see has asked if the volts on the PSU are ok or what brand it is.

I would be very interested to dee what voltage is at pin 8 (grey cable) socket by using the board fixing screw as the "ground" source as the blues are random??

Just for elimination http://www.sevenforums.com/tutorials/86648-psu-jump-start.html and test that pin 8 for fluctuations should be 2.4 - 6 v anything <or> it means the PSU is self testing and finding the fluctuations.

 

[ICIT2LOL]

I keep getting this BSOD some think about ntoskrnl.exe can any one help me thank you.

Hello and welcome Sub mate a tip start a new thread you will get a quicker response as this one may not get looked at until the next response and that might be sometimes one or two days

It is a commonly posted problem so put anew one in that section.

PS look at the section at the bottom of this post it might just contain an answer in those previous threads too. .

 

[Layback Bear]

My two cents I know this is a new build but no one that I can see has asked if the volts on the PSU are ok or what brand it is.

I would be very interested to dee what voltage is at pin 8 (grey cable) socket by using the board fixing screw as the "ground" source as the blues are random??

Just for elimination http://www.sevenforums.com/tutorials/86648-psu-jump-start.html and test that pin 8 for fluctuations should be 2.4 - 6 v anything <or> it means the PSU is self testing and finding the fluctuations.

Post #8

Lorry could you put what power supply you are using in your System Specs.
The minimum your video card requires is 500W.
Also make sure that both the 6 pin connectors to the video care are securely connected.

 

[Lorry]

Hello again, wish I could tell you my computer doing fine but it's not. I got 2 BSODS again while playing LOL. It is really weird, BSODS generally pops out when I play LOL. Any suggestions?

 

[Arc]

I would say that it is good that the BSOD is occurring on a particular game only, and LOL is a legend of BSODs.

The latest one is caused by relatek network driver.

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000005, fffff88002dbb6d0, 0, 0}

*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Probably caused by : Rt64win7.sys ( Rt64win7+1a0ac )

Followup: MachineOwner
---------

Update it from Realtek. Take the Win7 and WinServer 2008 R2 Auto Installation Program dated 2013/9/24.

Some display driver failure is also noticed there. But GTX 760 does not support the drivers older than WHQL 320.18 ..... and for some known reason we cannot suggest you to use that version. You have to wait for another display driver update from nvidia expecting that the update will reduce your graphics related issues.

Let us know how it is running after the network driver update.
____________________________________________________________________________________________________

BugCheck 1E, {ffffffffc0000005, fffff88002dbb6d0, 0, 0}

*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Probably caused by : Rt64win7.sys ( Rt64win7+1a0ac )

Followup: MachineOwner
---------------------------------------------------------------------------------------
BugCheck 3B, {c0000005, fffff800037846c1, fffff8800ac83020, 0}

Probably caused by : ntkrnlmp.exe ( nt!ObpCloseHandleTableEntry+51 )

Followup: MachineOwner
---------

 

[Lorry]

Hey guys! After updating bios my bsods has stopped. Can't thank you enough, finally I'm enjoying my new computer.You guys are doing really great job here keep it up.

I'll keep this thread up for a while just in case then I'll mark as solved.

 

[ICIT2LOL]

My two cents I know this is a new build but no one that I can see has asked if the volts on the PSU are ok or what brand it is.

I would be very interested to dee what voltage is at pin 8 (grey cable) socket by using the board fixing screw as the "ground" source as the blues are random??

Just for elimination http://www.sevenforums.com/tutorials/86648-psu-jump-start.html and test that pin 8 for fluctuations should be 2.4 - 6 v anything <or> it means the PSU is self testing and finding the fluctuations.

Post #8

Lorry could you put what power supply you are using in your System Specs.
The minimum your video card requires is 500W.
Also make sure that both the 6 pin connectors to the video care are securely connected.

Oops sorry Bear