Stop USB devices from being in "Safely remove" list

[macnab]

I can stop all my internal AHCI drives from showing up in "Safely remove" list by seting TreatAsInternalPort to true.

Now only my hot-swap drive shows up, so I won't accidentally eject the wrong drive.

But I have a flash-drive which I use for ReadyBoost, and a USB modem. Is there a way to remove them from the list as well? It is very difficult to see the correlation between USB ports in Device Manager and in regedit.

 

[A Guy]

It's possible you have a BIOS option to designate SATA ports as eSATA? They would then show as ejectable. I think BIOS would likely also list which controller each device is connected to. I assume this was the method you are using?

http://www.sevenforums.com/general-...-hardware-eject-media-problem.html#post539409

Hopefully one of our hardware experts will come along with better info

A Guy

 

[macnab]

Got all the SATA ports working as I want them to. Now I am asking about USB ports. I want my Internet Modem and ReadyBoost flash-drive removed from the list.

 

[A Guy]

Ooops, sorry See comment #28 here:

https://fightingforalostcause.net/1044

A Guy

 

[macnab]

Actually, that is the way I handled my SATA drives, although I got the info elsewhere.
Had a look around there and tried the "Capabilities" route, but that does not work. Didn't work with the SATA drives either.

With SATA drives you work through HKEY|LocalMachine\System\CurrentControlSet\services\msahci.
Found entry for usbstor, but that is generic for USB storage devices, it is not for that device.

Somewhere in the registry is a place to use TreatAsInternalPort for USB devices.

 

[ICIT2LOL]

I am not sure if this is what you want as I don't think it actually "removes" that notification.
USB Port Remains Active for Disabled or Safely Removed USB Device

Now if you are going to play in the registry then lease back it up FIRST
http://www.sevenforums.com/tutorials/4230-registry-backup-restore.html
Personally I always do this after a clean install and before I do even the simplest changes in the registry.

Just out of pure curiosity why do you use Readyboost?? if it were me (and yes I know you must have your reasons) I would just put in another 2GB stick of RAM.

 

[Lady Fitzgerald]

I can stop all my internal AHCI drives from showing up in "Safely remove" list by seting TreatAsInternalPort to true...

How did you do that?

 

[macnab]

@Icit2lol. This just "removes" the device after you have Safely removed it.
@Lady Fitzgerald. You need to know which ports to "remove" from the list. In my case I have 6 SATA ports. It is port 0 which I use to "hot-swap" my backup HDDs. I want to leave this port in the list.

Assuming you are using AHCI and using the default Microsoft driver, in regedit, go to HKEY_LOCAL_MACHINE\SYSTEM\Services\msahci. It should only have one key - Enum. Add a new key Controller0.

In my case, I added 5 sub-keys Channel1, Channel2, ... Channel5. To each of these add a new DWORD. Call it TreatAsInternalPort and then set the value to 1. Now those HDDs won't show up in the Safely remove list. Only an HDD plugged into the channel not modified will show.

 

[ICIT2LOL]

Just curious why the ports have to be removed and why Ready Boost as I personally never found it useful.

 

[macnab]

I use Safely remove to eject a backup HDD to plug in the next one. If I don't have my flash-drive and my modem in the list I won't accidentally eject them.

 

[Lady Fitzgerald]

...@Lady Fitzgerald. You need to know which ports to "remove" from the list. In my case I have 6 SATA ports. It is port 0 which I use to "hot-swap" my backup HDDs. I want to leave this port in the list.

Assuming you are using AHCI and using the default Microsoft driver, in regedit, go to HKEY_LOCAL_MACHINE\SYSTEM\Services\msahci. It should only have one key - Enum. Add a new key Controller0.

In my case, I added 5 sub-keys Channel1, Channel2, ... Channel5. To each of these add a new DWORD. Call it TreatAsInternalPort and then set the value to 1. Now those HDDs won't show up in the Safely remove list. Only an HDD plugged into the channel not modified will show.

Uh...that totally confused me.

 

[macnab]

Staring point: What do you want to do?

 

[ICIT2LOL]

I use Safely remove to eject a backup HDD to plug in the next one. If I don't have my flash-drive and my modem in the list I won't accidentally eject them.

Yes I have a list that pops up with he letter of the drive and if I am not sure of the letter I check in Computer and it usually tells you not only the letter but also the name of it ie "My Passport" see pic

 

[macnab]

I am trying to avoid "accidentally" having the mouse-pointer move to the wrong drive just before I click.

 

[ICIT2LOL]

Well the only suggestion I can think of is to reduce the speed of the mouse travel I have min set to fast but try slowing yours down to an acceptable speed.

In my pic it is slightly different in 7 where it shows Mouse and keyboard centre 7 will have a click speed option I lik to set that single and slow but you can have what you like.

 

[macnab]

I'll just be careful. But it would be nice to have a way to remove USB devices from the list.