Solved Intermittent, yet common BSOD problem; Latest: IRQL_not_less_or_equal

[picky]

The title Error message is NOT the only one I've seen. But it's the last one I saw.
I've been having BSOD's sadly, ever since I bought the computer, but never knew who to ask.
I replaced the Graphics Card after I bought the system, and don't know if the BSOD's Started before or after I installed the card.
The zipped folder is attached

 

[Arc]

Please take http://www.sevenforums.com/tutorials/92394-sf-diagnostic-tool-using-troubleshooting.html and let us see the resulting zip.

 

[picky]

Let me know if this worked

 

[Arc]

It is odd that both of our BSOD data collection tool does not contain lots of important data for you. Without those data we cannot assist you properly, and I am not aware of any more way to get those.

 

[picky]

Should I run both again after a crash, and post back?

 

[Arc]

OK, try it.

 

[picky]

I had a crash, right after I said that.

New Message: Page_Fault_in_Non_Page_Area

 

[Arc]

There are multiple different BSOD codes there, so it may be a memory related issue. It would be better to check the health of the RAM sticks at first.

Test your RAM modules for possible errors.

How to Test and Diagnose RAM Issues with Memtest86+
​

Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know. It would be better if you can take a camera snap of the memtest86+ screen before closing the program and let us see that image.

We will decide our next steps depending on the result.
__________________________________________________________

BugCheck 50, {fffff8800d054328, 0, fffff800030f5cf3, 0}


Could not read faulting driver name
Probably caused by : ntkrnlmp.exe ( nt!RtlDispatchException+1f3 )

Followup: MachineOwner
---------

BugCheck A, {fffffa80287c20f0, 2, 1, fffff8000314c0b6}

Probably caused by : memory_corruption ( nt!MiReleaseConfirmedPageFileSpace+86 )

Followup: MachineOwner
---------

BugCheck 7F, {8, 80050031, 406f8, fffff800031b8540}

Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )

Followup: MachineOwner
---------

 

[picky]

within a minute or so. got this

 

[picky]

Update before class

Run: 3 Errors: 64
Don't know if I need to keep it running still, or not.

 

[Arc]

Run: 3 Errors: 64
Don't know if I need to keep it running still, or not.

Read post #8 .... it is stated there that you should stop it after seeing a single error only.

Now follow the "Part 3: If You Have Errors:" of How to Test and Diagnose RAM Issues with Memtest86+

Errors/red lines means one or more RAM is faulty. But the fault may occur due to a faulty DIMM slot, too, which is a motherboard component. Using memtest86+, you can discriminate between a faulty RAM and a faulty motherboard.

How? Say you have two RAM sticks and two DIMM slots. You obtained errors at the test with all RAM sticks installed. Now, remove all the sticks but one. Test it in all the available slots, one by one. Continue the same procedure for all the available sticks.
How to make the inference that is it a RAM issue or it is a motherboard issue? Suppose you have got the result like that:

test|Slot1|Slot2
RAM1| Error | Error
RAM2|Good|Good

It is a RAM, a bad RAM.

But if you have got a result like that:

test|Slot1|Slot2
RAM1| Error |Good
RAM2| Error |Good

It is a motherboard issue. The particular slot is bad.

If it is a bad RAM, you need to change the RAM. Take the other existing (good) RAM to the shop and get one of the exactly same specification. The best is, get a totally new RAM KIT.

If it is a bad slot, it is a motherboard issue. But changing the motherboard needs a preparation for most of us; so dont populate that slot for the time being.

 

[picky]

Identified and confirmed bad stick, and have replaced sticks with
Corsair Vengeance LP 8GB (2 x 4GB) 1600MHz DDR3 240-Pin Desktop Memory, Model# CML8GX3M2A1600C9

 

[Arc]

Nice! Let us know for any further issue.

 

[picky]

I definitely will.
Thank you tremendously for your help Arc, Do you do this stuff for people because you just like being helpful?
I am slightly shocked by your helpfulness.

 

[Arc]

I am slightly shocked by your helpfulness.

Am I doing it wrong?

 

[picky]

Am I doing it wrong?

Not at all mane!
You are amazing dude, Thanks so much for all your help!

 

[Arc]

You are welcome, mate.