Still getting BSOD even after re-installing windows

[IMDMANx]

Hello I've been getting lots of bsods for the past 2-3 years and I think its time to get them solved. I've upgraded the graphics card, power supply and RAM but I don't think it's a hardware issue as I don't get them when going into safe mode. I've ran sfc /scannow and chkdsk /r but it has not made a difference. Also ran MemTest86+ for 8 passes and found no errors.

Specs:

Processor: AMD Athlon Dual Core Processor 4450e
Video Card: NVIDIA GeForce GT 630
Memory: 2.1 GB
Operating System: Microsoft Windows 7 Professional Edition Service Pack 1 (build 7601), 32-bit

Any help would be greatly appreciated.

 

[Laith]

Hiya and welcome to SevenForums!rb:

BugCheck A, {452d728d, 2, 1, 828e6e91}

Probably caused by : memory_corruption ( nt!MiIdentifyPfn+1ed )

BugCheck 1A, {41284, a9cce001, 3589, 88e00000}

Probably caused by : memory_corruption ( nt!MiLocateWsle+c1 )

BugCheck 1A, {41287, 24, 0, 0}

Probably caused by : ntkrpamp.exe ( nt!KiTrap0E+dc )

BugCheck 19, {3, 82b3eac8, 822362c0, 82b3eac8}

*** WARNING: Unable to verify timestamp for SYMEVENT.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEVENT.SYS
Probably caused by : SYMEVENT.SYS ( SYMEVENT+df25 )

I see my archenemy in the bugchecks, 0x19. Anyways let's get to troubleshooting

Uninstall Norton and install MSE for testing purposes. Run this for uninstalling Norton: http://www.sevenforums.com/tutorials/343888-norton-symantec-uninstall-completely.html

Run sfc /scannow and chkdsk /r.
Install the latest updates from Windows Update.

Do the exact same steps for chkdsk /r but instead of typing in sfc /scannow type chkdsk /r.

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

Run MemTest86+ for 8 passes. It must be MemTest86+. http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

 

[IMDMANx]

Updated dmps and added specs.

 

[Laith]

Have you done what i gave you?

 

[IMDMANx]

Yes I ran memtest86+ for 8 passes and found no errors. Also ran sfc /scannow and chkdsk /r but I still get blue screens.

 

[Laith]

Have you installed the latest updates from windows update?

 

[ZeldaYoshi]

If nothing you try is working to fix it, then it must have something to do with your motherboard or hard drive or even something else inside your computer that need to be replaced.

 

[Laith]

Now hold on ZeldaYoshi, that's why we run tests to see if something is failing or not.

 

[ZeldaYoshi]

Now hold on ZeldaYoshi, that's why we run tests to see if something is failing or not.

I didn't say it was the problem. I said it is possible it could be.

 

[Laith]

I know you didn't, it is probably the case this time, we'll just have to wait and see.

 

[IMDMANx]

Installed the latest updates from windows and even updated my drivers so I don't think the blue screens have anything to do with outdated drivers.

 

[Laith]

Please post the new dumps.

 

[Layback Bear]

IMDMANx please follow Laith guidance and do the needed test and post the results.

Testing will allow you to make better decisions on what is needed. We do try not to do guessing if at all possible.

 

[IMDMANx]

Here are the new dumps.

 

[Laith]

I'm sorry, IMDMANx, you'll have to wait until my debugger works correctly.

 

[IMDMANx]

Laith is your debugger working now?

 

[Laith]

Not yet, as fast as i get my debugger working i'll report back. Please wait for a little longer.

EDIT: Can you please follow some steps?

Reset your BIOS settings to default.

Run Display Driver Uninstaller(DDU)
Make sure you tick the Uninstall C:/AMD and C:/NIVIDA folders while you are in DDU when you are done running DDU install your graphics driver again. This is the guide for DDU: http://www.sevenforums.com/tutorials/367109-display-driver-uninstaller-how-use.html

Update your USB drivers.

Run MemTest86+, It must be MemTest86+. http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

Run Driver Verifier for 24 hours. http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html


Run sfc /scannow and chkdsk /r.
Install the latest updates from Windows Update.

Do the exact same steps for chkdsk /r but instead of typing in sfc /scannow type chkdsk /r.

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

 

[IMDMANx]

I reset my BIOS and I haven't gotten any BSOD's yet. Was resetting the BIOS all I had to do after all these years with BSOD's? I'll report back if I get anymore.

 

[Laith]

Yup, seems like so. I hope there will not be anymore BSODs.

 

[IMDMANx]

I now get bsods when playing games so they are back