BSOD after boot, but only during first 3 min!

[andrea1978]

S!

I have a problem with my ATI HD4850/Windows 7 32bit retail. After system boot, I can not do anything for the first 2-3 min (i.e. open programs), otherwise BSOD comes out. If I wait for 2-3min, the PC works fine, and I can re-boot the system without problem: the BSOD appears again if the system was off for long time (i.e. 30 min).

I have changed two monitors (a VGA and a DVI), with Catalyst installed or without it... same problem.

Any suggestion?
Thank you.

 

[Tews]

Please navigate to c:/windows/minidump, zip up any .dmp files and attach them to your next post.. None were contained in the last attachment..

 

[andrea1978]

Please navigate to c:/windows/minidump, zip up any .dmp files and attach them to your next post.. None were contained in the last attachment..

Thanks, I hope it is ok now.

 

[Tews]

Your .dmp file shows a 0x124 hardware error.. Unfortunatly it does not really tell us a lot about which piece of hardware is faulty.. Read this thread about possible solutions...

Stop 0x124 - what it means and what to try

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, 858fd8fc, 0, 0}

Probably caused by : hardware

Followup: MachineOwner
---------

 

[andrea1978]

Thank you.
I find this uninstalled driver: Intel(R) ICH7 Family LPC Interface Controller - 27B8. I used the Intel chipset install software, but the device is still unknown...