Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Need drivers for Win 7 Pro for Intel Server board - se7230nh1-e

15 Dec 2013   #1

Win7 Pro 64 Dual boot with Win7 Pro 64
Need drivers for Win 7 Pro for Intel Server board - se7230nh1-e

Converting an Intel server (Win2003) to a Win 7 Pro workstation. During the install the drives are not recognized. Tried driver from Intel - intel_ichx_msft_raid_v.4.4.0630.2006_whql_updated - but still not detected.

The BIOS is still set to SATA but I have IDE and ACHI? as other options.

I intend to use theses in a RAID mode in the end but am going to try setting the BIOS to IDE for the time being.

Any Suggestions on how to get the drives recognized during the install of Win 7 Pro?

Thanks in advance,


My System SpecsSystem Spec
16 Dec 2013   #2

7 Pro x64, 10 Pro x64

it seems that that system does not have any drivers for windows 7 as it was never designed for it and as such neither does it have drivers for 2008 or r2 so using r2 drivers are out of the question your best bet is probably AHCI and software raid once in your OS, you may need to break your current array to set it to AHCI i'm not familiar with that board's raid setup. i mainly use a s5000xvn in my office. To get windows to see the drives for that at install i had to load drivers manually after picking custom install for 2008 r2.
My System SpecsSystem Spec

 Need drivers for Win 7 Pro for Intel Server board - se7230nh1-e

Thread Tools

Similar help and support threads
Thread Forum
Graphic card for intel board
Hello all i have an Intel Board DH61WW and i want to install a graphic card to use Pro/E software,so i want to know which graphic card my board will support so that i can run the software?Help me with this,thanks.
Graphic Cards
Win 7 Pro 64 Hangs during installation on Intel S5520HCT server board
I have a mysterious problem I need help with. I have searched this forum and elsewhere and attempted what has been suggested ... but to no avail. This is the situation. I am building two servers with identical hardware ... Intel S5520HCT mother board, dual Xeon E5607 2.26GHz, Seagate SATA 2TB...
Installation & Setup
intel discontinued desktop board drivers
is it possible for intel discontinued desktop board users to get driver for windows seven.or i have to purchase new machine which supports windows seven? sorry for bad english & if there is any rules for new threads which i broked.coz i'm new here & don't know anything about rules.(p.s.Tried to...
Intel® Desktop Board DX58SO & Intel® Chipset Device Sof
Hi Friends: Yesterday, I installed my new computer and it has the following: - Intel DX58SO Extreme Series X58 - Intel Core i7 920 2.66GHz - Corsair TR3X6G1600C8D Dominator 6 GB - EVGA 02G-P3-1185-AR GeForce GTX285 - Western Digital 300GB Sata HDD 10K RPM - WDC WD1001FALS-00J7B0
Intel P4 800mhz FSB on a 400/533 FSB Board
Tittle says it all i'm trying to run a 800mhz FSB processor on a motherboard that supports 400/533mhz FSb. so my question is, will the processor run at full speed? will it work at all? XD Thank you very much for any replies :) Mercurial~
Performance & Maintenance

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 10:31.
Twitter Facebook Google+