New
#1
New UD5h build does not boot up properly, even into the BIOS
I just finished building my computer and it was working normally when i turned it on first but after it kept giving me static. The first screen itself hangs.
My Specs are as follows:
Motherboard: Gigabyte Z77 UD5h
CPU: Intel i7 3770
Cooler: Corsair H80
RAM: G.Skill Ripjaws X 1866MHz 8GB
SSD: OCZ Vertex 4 128GB
PSU: Corsair TX850
Case: NZXT Phantom Full Tower
VGA Monitor
I have only recently (yesterday) finished. The first boot i was scared but i heard the beep and was happy. I was able to play with the BIOS (i only turned virtulization on and made DVD drive before SSD). I looked up the CPU temperatures to see if the cooler was working great and it was 25 degrees Celsius. I was able to turn the computer on like this about 2 times before the problem occurred.
I turn on the computer and go to BIOS and i receive these coloured static lines. Sometimes black screen. Sometimes black screen with with different coloured bars. I do not know what the problem is. I have tried switching to the backup BIOS but it worked for a little bit and not it does not. I cannot hear a beep anymore. It takes a few seconds after the main Gigabyte screen loads for the problem to start. I would really like urgent help thanks.
Also it cannot be the monitor because it works perfectly connected to my laptop.
Thank you!
*I am leaning towards the CPU graphics being the problem now. The BIOS and gigabyte splash screen pops up but after that it just hangs. With the monitor static.
*I keep getting the normal lights, no error . The lights just stay the same when the static comes. The lights range from AE to AB (boot legacy to boot BIOS), depending on what I was doing before.
Last edited by brownix; 14 Jul 2012 at 10:41.