blinitializelibrary failed 0xc0000001 after successfull installation

I don't have any system installed on my laptop atm so checked physically:
256GB SSD Hard Drive (M2 Sata - 3) (SUB) 50+ call) MZNLN256C https://www.powersourceonline.com/bu...256C-cy-en.jsa

Do I have to use a vanilla Win7 iso (unaltered) to extract those image files or the ones I've tweaked with Rufus and/or other tools like Windows Image Tool or AsusEZ?

4. Right click and Run as administrator on the the 7UPDATERv50.cmd - So now it says "PLEASE SELECT THE PATH OF THE WINDOWS INSTALLATION FILES E.G. C:\GRMCULXFRER_EN_DVD" so I selected the Win7 iso from PowerIso and it didn't work. Then tried the path of 7UPv57 file I copied the Win7 installation files to and still nothing. It says "install.wim NOT FOUND. I can't see it either. Should I use a different ISO? Can't find it in neither of my ISO images. Maybe these are wrong Win versions.

Yeah, none of my isos had that in "source" folder. I even checked that so finally got the perfect iso having that. Now the blue command window didn't even show up and instead installed the updates.i had to reboot and it's still installing the updates on my desktop. Looks like it'll take couple good hours.

I haven't expected that but hope it'll only do even more good for my desktop. But I thought it'll only install on my folder I'm preparing for my pen drive and laptop. Wonder I'd this update pack contains the latest Windows 7 KB4534310 final update. That'd be awesome.

Currently it's installing KB4125574-v4 and taking forever. I'll have a nap and later check if it's finished.

My bad, I accidentally launched a different file (updater) so it updated my desktop which is good I hope. So after integrating the drivers at the end of the command window it said: Integration is possible only in an image without cumulative updates.
It's strongly recommended to integrate dotnet framework 4.8 which I've done too. Maybe that's the case.

Then I booted my pen drive image on the laptop and on POST (UEFI:NTFS (x64)- Could not locate 'efi\boot\bootx64.efi': [14] Not Found. Press any key to exit. And I can confirm I don't have no efi folder nor bootx64.efi file. Wrong Windows image? Should I start over? If so then let me know if I have to use Rufus (MBR stuff) 1st and then integrate the drivers you gave me the link which I did. Sorry but I'm a bit more and more confused, maybe I messed the order.

On FAT32 install.wim file is considered to be too big.

CSM Support was greyed out for some reason. I went to Security, disabled Secure Boot Control so I could Enable CSM Support Again. But then Fast Boot option disappeared (I had it disabled anyway) and under CSM Support now there's "Launch PXE OpROM policy" which disabled as default. Not sure if I should bother with it.

And now I can see both UEFI USB DISK 2.0 PMAP, Partition 2 and USB DISK 2.0 PMAP in the Boot Menu (and Partition 1 when I used FAT32). Choosing UEFI - there's that "Could not locate" error. with USB DISK - there's only the black screen and nothing happens. I found this video but "Boot Configuration" is greyed out so I can't do anything about that unless it's again some Security option to unlock Could not locate 'EFIBootbootia32.efi': [14] Not Found (2 Solutions!!) - YouTube


Should I load some files to BIOS before Win7 installation?

I had to integrate the updates once again so it took like a half a day and this time everything worked fine (55 updates, I'm very impressed). Thank you! But now it says "No connections are available" when I want to connect my laptop to wifi. Because it's a bit different problem - should I call this thread and start a new one?

AsusLive Update won't work without internet so I tried installing Realtek Ethernet Controller Driver offline (only for W10) and "FindFile failed" since it can't find wifi connection list. "The Realtek Network Controller was not found. If Deep Sleep Mode is enabled Please Plug the Cable. - Do I have to use the ethernet cable temporarily?
Updating drivers via Device Manager doesn't work either.

I watched some tutorial on yt and some dude said to uninstall the network adapter driver so it was supposed to reset the settings and unlock connections list. Nothing happened. Do I have to integrate all drivers with Simplix like I did with e.g. Net Framework 4.8?

Btw "Your computer can't come out of hibernation. Status: 0xc000000d". I guess hibernation mode won't work properly on i7 and Win7. And Sleep mode is greyed out. I can't access it.

I went to the Realtek official website, downloaded both Realtek USB Ethernet Controller All-In-One Windows Driver and Realtek Etherned Controller Driver. Still can see the red cross on network icon.

Only Ethernet cable works and that's not the solution cause I want WIFI that works. Bluetooth also doesn't seem to work in Device Manager.

And the network icon looks like a computer instead of WIFI bar icon. I started WLAN AutoConfig because it was turned off - still nothing.


I'm calling this thread. I realize it became messy and there are new issues matching different forum categories now so thanks for help, @Megahertz07 and you @SIW2 for fantastic tools!

Well maybe I missed that unless you mean other updates. I've seen installing 1 of 55 updates. Maybe I wasn't paying the attention since I AFK-ed a bit. That's even more shocking.

As for the yellow remarks, the one doesn't appear on my network adapter. But I'll run the Simplix again, maybe use a different W7 iso. If that makes a difference I'll download a final January 2020 version. It's said to be modded, integrated with these below:

Drivers Integrated:
Alpine Ridge USB
AMD MISC(include all drivers usb 3.0 and chipset's)
NVidia MISC
Asmedia USB
Fresco Logic USB
Etron Technology USB
Renesas Electronics USB
Intel USB
VIA USB
Intel Chipset
Intel DPTF
Intel IO
Intel AHCI
Intel MEI
Intel NVMe
Micron NVMe
OCZ Toshiba NVMe
Plextor NVMe
Samsung NVMe

I don't know if AMD thing will cause a conflict but I'll try that anyway too, surely won't hurt. Once again thanks much for your patience.

I'm not sure if you're talking about after installing W7 or before when it comes to use WU. I haven't reinstalled yet and thought maybe it could work now but it's looped (checking updates forever).


When using Simplix - can I use drivers in folders or they have to be folderless or else it won't see and integrate all drivers? E.g. My dotNet Framework is just 1 file without any folder. I'm worried if some similar drivers might use the same files so didn't want to go too messy with with

Megahertz07 said:

Glad to see you have it working.
Simplix has more than 200 updates. Howcome you only slipstream 55?

That sounds right, it is only 55 now. One of them is the biggie with the naughty bits removed. That is why it is no longer 200.

When using Simplix - can I use drivers in folders or they have to be folderless or else it won't see and integrate all drivers?

simplix doesnt install your 3rd party drivers. What gave you that idea?