New
#1
First build crashing
Hello,
I am hoping someone can give me advice with trouble shooting. I just finished building my first machine and loaded Windows 7.
CPU – Intel E8400 3G
MB - GIGABYTE GA-EP43-UD3L 775 P43 R
RAM – Corsair 4GB (2 x 2GB) 240-Pin DDR2
GPU – BFGTECH GeForce GTX-275
PSU – Corsair 550W
HD – 80G and 500G
Everything seemed fine as I was loading software, updating drivers and configuring. Then I started getting random crashes the crashes became consistent as whenever the machine is pushed. It will either blue screen or just freeze and I will have to physically push the power button to restart it. I downloaded a stress test and temp monitoring software to help diagnose.
CPU and GPU temps are 97*F and 120*F at idle. Ran the stress text at 100% and temps topped out at 127*F for the CPU and 140*F GPU just before crash. If I run the stress test just on RAM it passes, on CPU and GPU fails, just CPU fails, just GPU fails.
Blue screens error messages are inconsistent so far the only error messages I was able to retrieve were:
CNG.SYS
SRTSP.SYS
CLASSNP.SYS
IRQL_NOT_LESS_OR_EQUAL
PAGE_FAULT_IN_NONPAGED_AREA
I hope I provided enough information. I have a feeling it’s a hardware issue but temp seem to be in normal range. Any suggestion would greatly be appreciated.
Last edited by johngalt; 11 Sep 2009 at 10:41. Reason: Please do not post from Outlook or Word - the black font color gets cpoied over and is impossible to read on a dark skin.