Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Post Your Overclock! [2]

21 Jan 2013   #371
OneDarkLord

MS Windows 7 Ultimate 32-bit SP1
 
 

I can't even overclock in 1 value higher,the PC won't start :P,not enough money for gud PC


My System SpecsSystem Spec
.
21 Jan 2013   #372
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

OneDarkLord, maybe consider building your own computer. There are a bunch of people here who are very good and will help picking parts and tell you how every step of the way. You could start with a new Motherboard, CPU and ram and use the parts you already have for the rest, then upgrade those as money allows.
My System SpecsSystem Spec
23 Jan 2013   #373
Terronium 12

Windows 10 Technical Preview - x64
 
 

It's pretty cold out (finally) so I'm gonna take Steve's advice and try for 4.6 again, and hopefully I won't wake up tomorrow burnt to a crisp.
My System SpecsSystem Spec
.

24 Jan 2013   #374
Bungee18

Windows 7 Ultimate x64 SP1
 
 

Hi guys,
Here's my OC with new board and CPU.
Temps: 43C Core Temp, 50C CPU (max)
Stable after 10 passes of IBT very high setting.

I couldn't have done it without Tommy's help, advice and patience. Thank you very much!!!

Cheers,

J


Attached Thumbnails
Post Your Overclock! [2]-capture.png  
Attached Images
Post Your Overclock! [2]-capture2.png 
My System SpecsSystem Spec
24 Jan 2013   #375
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

Nice job, Bungee. Looks good. Well done.
My System SpecsSystem Spec
24 Jan 2013   #376
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Nice OC Bungee, well done, didn't take you long.
My System SpecsSystem Spec
01 Feb 2013   #377
ganjiry

Win7 Home Premium x64 SP1
 
 

Nice Oc Bungee

I upped mine slightly today from 4.0 to 4.3Ghz. I've not spent a lot of time on it and reckon the Vcore could come down some or i could go up another multiplier. Scores in Cinibench/ Unigine and MaxxMem have all increased slightly and WEI has gone from 7.3 to 7.5 for the cpu.
Cinibench score
Cpu @ 4.0= 4.89
Open GL =46.46

@ 4.3
Cpu = 5.24
Open GL = 49.35
After 10 passes of IBT max temp was 46c so all good so far


Attached Thumbnails
Post Your Overclock! [2]-unigine-maxed-cpu-4.3.png  
Attached Images
Post Your Overclock! [2]-cpu-z-4.3ghz.png Post Your Overclock! [2]-maxxmem-cpu-4.3ghz.png Post Your Overclock! [2]-winsat-mem.png 
My System SpecsSystem Spec
01 Feb 2013   #378
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

ganjiry, Nice scores. At those temps, you have a ways to go.
My System SpecsSystem Spec
01 Feb 2013   #379
Bungee18

Windows 7 Ultimate x64 SP1
 
 

Very nice Ganjiry!
Cheers,
J
My System SpecsSystem Spec
01 Feb 2013   #380
Bungee18

Windows 7 Ultimate x64 SP1
 
 

Here is my new one with some further tweaks.
Seems to be running at ridiculously low Vcore under load.
I read about the vdroop issues with these boards, but this much?
BIOS set at 1.43, runs at 1.37 tops.
Can it be that CPUZ is reporting the wrong vcore?
Cheers,
J


Attached Thumbnails
Post Your Overclock! [2]-capture.jpg  
My System SpecsSystem Spec
Reply

 Post Your Overclock! [2]




Thread Tools




Similar help and support threads
Thread Forum
Should I overclock my CPU?
Hello all, Recently my temps of my CPU have gone out of control, however, I disabled turbo mode in my bios and it works much better. Temps are less than 70c under full load My question is should I overclock this CPU I have? specs: CPU: Intel core i5 650 3.20GHz Mobo: Intel dq57tm
PC Custom Builds and Overclocking
odd post/bios screen, plus no keyboard detected @ post
i had recently built a new computer. after installing windows 7 everything was fine, except for during start-up it'd say 'no keyboard deteced'. which it wasn't detecting it because i couldnt acess bios during this. once i came to the windows log in screen, it was then reading the keyboard. a...
General Discussion
Cant seem to get an overclock
Hi have an i7 2700k and an Asus P8H 61-M LE usb3 mobo and when i do a autotune overclock it says 4.0ghz and should set in the bios but it dosent,could anyone help me out on this one please Thanks
PC Custom Builds and Overclocking
Post Your Overclock!
Here you can Post your Overclocks and Benchmark results! I have added download links for your convenience. Latest GPU-Z v0.3.7 Latest CPU-Z v1.52 3DMark Vantage Download here!!
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:24.
Twitter Facebook Google+