what is the winfast screen i get??


  1. Posts : 18
    windows 7 home premium 64bit sp1
       #1

    what is the winfast screen i get??


    hello folks,this is my first post with a problem i am looking for a solution for,so please bare with me!

    im running windows 7 hp and thanks to this forum have reduced my boot up time from eleven mins to a respectable 2 mins something.

    however,when i hit the power button to turn on my comp,the first screen that loads is a black screen with the words 'winfast' in big letters across the screen.
    this screen stays like that for 6 mins,sometimes longer and for the life of me i cant figure out why.

    im assuming this screen that starts is not directly related to the system booting as it stays for longer than soluto tells me my boot time was in total.

    what i would like to know firstly it what exactly winfast is,and if/how i can reduce the hang time for the winfast screen or idealy remove it so that on power up my system goes straight into boot mode so that i get an actual 2 min boot rather that a 2min boot plus and extra 6 mins while i wait for it to start the boot!

    i hope that makes sense and thankyou in advance for any help offered.

    ps,please keep any instructions as simple as poss as im not the most computer savvy person here! thanks
      My Computer


  2. Posts : 17,796
    Windows 10, Home Clean Install
       #2

    Welcome to the Forums
    If it does not come up with a clean boot, you can determine the cause
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
      My Computer


  3. Posts : 18
    windows 7 home premium 64bit sp1
    Thread Starter
       #3

    hi,thanks for the reply. i did try this 2 days ago but the winfast screen still came up as usual.but i was not really sure what to make of that so i didnt go any further with it as im always cautious about attemping things with my system that im unsure about. i killed many a pc in past years messing with things i didnt understand lol. but thankyou for your input.
      My Computer


  4. Posts : 17,796
    Windows 10, Home Clean Install
       #4

    Download and make a full scan with malwarebytes. Update first
    Do the same with your anti virus.
      My Computer


  5. Posts : 18
    windows 7 home premium 64bit sp1
    Thread Starter
       #5

    i already have malwarebytes and i use avast too. neither has flagged up with any problems.
      My Computer


  6. Posts : 17,796
    Windows 10, Home Clean Install
       #6

    Are you using a TV tuner card from this company?
    Leadtek - We make dreams a reality
      My Computer


  7. Posts : 18
    windows 7 home premium 64bit sp1
    Thread Starter
       #7

    lol,i have just been on that very site to see if i could find anything out.but no,i have no tv tuner card on my system.assuming the winfast on my system didnt come with it already on?dont really know much about it to honest.but when i had my system built by a friend i never ordered or paid for such a card (assuming its something you have to buy seperate?)
      My Computer


  8. Posts : 17,796
    Windows 10, Home Clean Install
       #8

    Type device manager in search and look for any cards that may be it.
      My Computer


  9. Posts : 1,117
    Windows 7 Ultimate x64
       #9

    From where did you purchase your copy of Windows?

    Are you sure it's legitimate?

    Can you at least snap a photo of the offending lettering on your screen and post the snap-shot here?
      My Computer


  10. Posts : 18
    windows 7 home premium 64bit sp1
    Thread Starter
       #10

    hello again,sorry i have not made any replys,ive been needed elsewhere! got my copy of windows from pc world and it has been validated.however,i was helping the mrs have a clear out earlier and i came across a winfast cd,which i can only assume is the one my mate used for my comp way back when. it has winfast 748k7aa in big letters on the front of it,and version 1.0 and winfast utility cd. there is also a list under all that which reads;chipsets drivers. device drivers and super utilitys. adobe reader6.0. directx 9.0b and norton.

    anyway,i googled the number and it seems to refere to the motherboard and bios.i wondered if maybe my bios is so old it just does not perform very well or something? i could be way off with that,im just guessing! anyway,i hope that maybe puts someone onto the right path as to what causes the winfast screen to hang for so long.thanks for the help so far folks:)

    ps..i also found another cd which is an overclocking utility by sapphire version 5.8.its the driver cd.driver version 12-038 (8.162)
    its no good to me as i wouldnt even know where to begin with it,so if anyone wants it,just let me know..if not,i will just bin it! :)

    pps.. mpcrsc562 the screen is just a black one,with winfast in large letters across the top,and i have the option to hit a key at the bottom to enter bios. i cant take a pic im sorry,my camera is dead and my mob camer is rubbish! lol
    Last edited by mrmurder1975; 10 Nov 2010 at 11:17. Reason: more info
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 05:29.
Find Us