What's your memory assessment speed?


  1. digitalrurouni
    Posts : 251
    Windows 7 x64 Pro
       New #1211

    A Guy said:
    digitalrurouni said:
    This is what CPU-Z is telling me. I have not done any serious overclocking or tweaking in a while so I am a bit rusty...go a bit gentle on me :P
    That does say you are running at 1600MHz. What does the SPD tab show? Your specs don't say how much ram you have. You are indeed running 3 dimms, triple channel? I don't see Corsair on the QVL (Qualified Vendor List), so I can't get much info. Obviously it's working, and I suspect it isn't an issue. Perhaps when Dave76 or another hardware Guru comes by, they will have some ideas.

    A Guy
    My specs show 6 GB of ram. I have a feeling it could be that theoretical bandwidth could be higher with the Sandy Bridge dual channel architecture though I am not sure. I am probably just speaking blah blah at this point in time. I am gonna look in to this XMP profile in my BIOS and see if I can figure something out.
      My Computer

  3. essenbe
    Posts : 26,870
    Windows 11 Pro
       New #1212

    digitalrurouni said:
    A Guy said:
    digitalrurouni said:
    This is what CPU-Z is telling me. I have not done any serious overclocking or tweaking in a while so I am a bit rusty...go a bit gentle on me :P
    That does say you are running at 1600MHz. What does the SPD tab show? Your specs don't say how much ram you have. You are indeed running 3 dimms, triple channel? I don't see Corsair on the QVL (Qualified Vendor List), so I can't get much info. Obviously it's working, and I suspect it isn't an issue. Perhaps when Dave76 or another hardware Guru comes by, they will have some ideas.

    A Guy
    My specs show 6 GB of ram. I have a feeling it could be that theoretical bandwidth could be higher with the Sandy Bridge dual channel architecture though I am not sure. I am probably just speaking blah blah at this point in time. I am gonna look in to this XMP profile in my BIOS and see if I can figure something out.
    The only 2 differences I see are you run tripple channel and I am dual, and you have 1600mhz ram and mine is 1866.
      My Computer

  4. digitalrurouni
    Posts : 251
    Windows 7 x64 Pro
       New #1213

    Ok so I did some reading about my motherboard and all that. Turns out my Uncore needed to be set up to twice the DDR3 RAM frequency...so now that it is set to the correct value, here is my latest score. I am sure there are a plethora of non optimal settings in my motherboard right now and it will take me a bit of reading and tweaking to get it to where I want it :) But what do you guys think? It's quite a decent boost from what it was previously!
    Attached Thumbnails Attached Thumbnails What's your memory assessment speed?-winsatmemscore.jpg  
      My Computer

  6. YTBOY83
    Posts : 617
    Windows 7 64Bit Ultimate Edition SP1
       New #1214

    6.00 GB Dual-Channel DDR2 @ 401MHz
    Attached Thumbnails Attached Thumbnails What's your memory assessment speed?-untitled.png  
      My Computer

  7. profdlp
    Posts : 3,187
    Main - Windows 7 Pro SP1 64-Bit; 2nd - Windows Server 2008 R2
       New #1215

    essenbe said:
    profdlp said:
    In my case, it's DDR3 RAM @1600 in Triple-Channel.
    Prof, where is your score? I haven't seen it.
    It's about a dozen or so pages back. Here's one from today:
    Attached Thumbnails Attached Thumbnails What's your memory assessment speed?-winsat-mem-10july2011.jpg  
      My Computer

  8. essenbe
    Posts : 26,870
    Windows 11 Pro
       New #1216

    profdlp said:
    essenbe said:
    profdlp said:
    In my case, it's DDR3 RAM @1600 in Triple-Channel.
    Prof, where is your score? I haven't seen it.
    It's about a dozen or so pages back. Here's one from today:

    Good score.
      My Computer

  10. A Guy
    Posts : 53,365
    Windows 10 Home x64
       New #1217

    digitalrurouni said:
    Ok so I did some reading about my motherboard and all that. Turns out my Uncore needed to be set up to twice the DDR3 RAM frequency...so now that it is set to the correct value, here is my latest score. I am sure there are a plethora of non optimal settings in my motherboard right now and it will take me a bit of reading and tweaking to get it to where I want it :) But what do you guys think? It's quite a decent boost from what it was previously!
    Nice bump, it's just numbers, but indicative of proper setup. A Guy
      My Computer

  11. kellymac35
    Posts : 274
    WINDOWS 7 Ultimate x64 Full
       New #1218

    A Guy said:
    essenbe said:
    A Guy said:

    Show off!

    A Guy
    That's about the only thing I have that I can show off with
    There is the light saber...

    A Guy
    Here is a light saber 1.25 Watt Arctic SPYDER lite a match from 14 ft away
    Attached Thumbnails Attached Thumbnails What's your memory assessment speed?-dscf8572.jpg  
      My Computer

  12. essenbe
    Posts : 26,870
    Windows 11 Pro
       New #1219

    kellymac35 said:
    A Guy said:
    essenbe said:

    That's about the only thing I have that I can show off with
    There is the light saber...

    A Guy
    Here is a light saber 1.25 Watt Arctic SPYDER lite a match from 14 ft away

    OK, I'll bite. What is an Artic Spyder?
      My Computer

  13. kellymac35
    Posts : 274
    WINDOWS 7 Ultimate x64 Full
       New #1220

    A laser
      My Computer

 

  Related Discussions
What's your memory assessment speed? [2]
in Performance & Maintenance

Continued from - https://www.sevenforums.com/performance-maintenance/5400-whats-your-memory-assessment-speed.html I decided to open a thread to show what people are getting with there current memory settings, what improvements are shown with various timing tweaks, speed settings ect. to access...
CPU Speed, BCLK and Memory Speed: Boot failure.
in PC Custom Builds and Overclocking

Probably I am in the right section for this issue. If not, please move it. A couple of days ago I changed the motherboard and processor, but not the RAM as the RAM is apparently compatible with that board as stated in GIGABYTE - Motherboard - Socket 1150 - GA-B85M-D3H (rev. 1.0/1.1) ...348753...
Memory speed - wrong memory???
in Hardware & Devices

Hi. I am hoping you can help with an issue I am having with memory in my sons PC. It does not seem to be running as good since I installed 16gig of memory. Motherboard - ASUSTeK Computer INC. M5A78L-M/USB3 Processor - AMD FX-4100 @ 3.60 GHz It had 1 4gig stick of Kingston KVR1333D3N9 but I...
What's your hard drive assessment speed?
in Performance & Maintenance

I'm curious to see what other people are getting for their WEI disk scores. I would like to see all types and combinations of drives to see how they differ in performance. If possible try to keep HDTach/HDTune/etc. scores to a minimum as there is another thread for that. Some general questions...
Memory Assessment Speed
in Performance & Maintenance

Just a curious question; I ran winsat mem a couple of weeks ago and got a 13600+ read. Ran it today and got 15985 read. Only system change was adding a Radeon 6670 Video card. Does memory speed change this much ? What might cause the disparity ?
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 03:24.
Find Us