SFC scannow cannot repair problem..

Page 3 of 3 FirstFirst 123

  1. amoretam
    Posts : 362
    Windows 7 x64bit Home Premium
    Thread Starter
       New #21

    The screen never went black on me.
    This just happens when i turn off the computer and try to boot up again.
    My MOBO uses a slightly modified version of the American Megatrends AMIBIOS. When I looked in BIOS central it says that 1 long and two short beeps mean: An error was encountered in the video BIOS ROM, or a horizontal retrace failure has been encountered.

    But when i looked in the AMIBIOS8 Checkpoint and Beep Code List PUB.pdf
    i found no such code listed.



    Night Hawk said:
    That may be slightly warm but still within the normal temp range. It also depends on what you were doing when the screen went black on you like running a game or something else that would place a good load on the card which then heated up further.

    The cpu temp was great and not any worry there on that. Now you have to find out which bios is used on that make and model board however in order to look up the actual definition for the 1 long 2 short while I suspect the card itself may be the card on the way without actually seeing temps high enough to overheat since most of this is being seen at startup.
      My Computer
    Quote Quote

  3. Night Hawk
    Posts : 8,375
    W7 Ultimate x64/W10 Pro x64/W11 Pro Triple Boot - Main PC W7 Remote PC Micro ATX W7 Pro x64/W11 Pro
       New #22

    For 1 long 3 short if that is what you should be hearing that would be "
    Reseat the memory, or replace with known good modules.
    " according to the AMI Ameritrends pdf guide seen at http://www.ami.com/support/doc/AMIBI...e_List_PUB.pdf

    There are only three codes listed way at the bottom of that one in section #8.2.1 which amounts to page #15. AMI typically doesn't see as many as seen with other bios versions. At least you won't have to worry about cooking anything and you already reseated the memory when moving dimms around.
      My Computers
    Quote Quote

  4. amoretam
    Posts : 362
    Windows 7 x64bit Home Premium
    Thread Starter
       New #23

    This thread is on pause due to system reparation by technician....
    I'll give you all an update when done..
    Thanks
      My Computer
    Quote Quote

  6. ryo
    Posts : 1,953
    windows 7
       New #24

    amoretam said:
    This thread is on pause due to system reparation by technician....
    I'll give you all an update when done..
    Thanks
    thanks for the update and information that's you give.
      My Computer
    Quote Quote

 
Page 3 of 3 FirstFirst 123

  Related Discussions
I'm having a massive amount of problems with Windows 7 Ultimate. I figured the only thing to do was an in place repair. But the CD won't run. I can get it to the start window, then it just hangs and will for hours until I start my computer. I've tried scannow, but it says it couldn't fix all...
SFC /Scannow Cannot Repair Errors
in Performance & Maintenance

Being new to this forum, excuse any incorrect requests... Anyway, I have a Lenovo PC that started having very long boot up time (greater than 12 minutes). Have checked everything possible, no Malware found, viruses, Trojans and so on. Tried all that I know to try and fix problem with no luck...
Hello 7 gurus I'm a n00b that needs help regarding these entries in SFC log: I recently "fooled around" with changing the OEM Information on System properties page in W7 HomePrem SP1 x64 using instrux from this guide (and others floating around the Netz) and decided to change everything back to...
SFC /scannow can't repair autochk.exe
in Performance & Maintenance

I just found out I can't schedule a chkdsk scan, even after scheduling it the scan will not run when the computer reboots. I used the sfc scannow option and the results said something like "windows resource protection found integrity violations" with autochk.exe I attach my sfcdetails.txt file ...
SFC /scannow cannot repair catsrvut.dll
in Performance & Maintenance

Howdy, I have Win7x64Ulti -Dell OEM I auto installed Sp1 in a moment of weakness (gave in to the pain of Win7). I have problems with some programs around com+ and VSS, notably Casper, but others as well so I ran sfc /scannow. Only one file shows up as a problem and Win says "cannot...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 16:45.
Find Us