1GB Installed memory, only 1gb usable.

[mty]

I have looked in several forums, including this one. and every option i have found. dont help me so much ;(

I have also checked the BIOS . but there is no place where i can dissble " Dram over 4Remapp" or something like that.

everything i can think of i have checked.

I know 32bit can't handle more than 2 or 3GB memory, but it can handle 2gb, that much i know.
when i start my computer. it show 1024mb ram . that counts that up. but in everything else it shows 2GB bit 1 usable.
and it says that 1024mb is hardware reserved, ( maybe it is that ? how do i change that ?
I have run a test. nothing wrong with either of the memory sticks
I also have seperat graphic card with 512BM Ram on

can someone help me , please.

Thank you

 

[Irunongames]

Errrr I think you mean you have 2gb but it will only use 1. Is the slot for the RAM card working? Also is the Ram chip still working, a pin might not be working

 

[zigzag3143]

I have looked in several forums, including this one. and every option i have found. dont help me so much ;(

I have also checked the BIOS . but there is no place where i can dissble " Dram over 4Remapp" or something like that.

everything i can think of i have checked.

I know 32bit can't handle more than 2 or 3GB memory, but it can handle 2gb, that much i know.
when i start my computer. it show 1024mb ram . that counts that up. but in everything else it shows 2GB bit 1 usable.
and it says that 1024mb is hardware reserved, ( maybe it is that ? how do i change that ?
I have run a test. nothing wrong with either of the memory sticks
I also have seperat graphic card with 512BM Ram on

can someone help me , please.

Thank you

Boot into BIOS and look for max memory. should be unchecked

 

[zigzag3143]

I have looked in several forums, including this one. and every option i have found. dont help me so much ;(

I have also checked the BIOS . but there is no place where i can dissble " Dram over 4Remapp" or something like that.

everything i can think of i have checked.

I know 32bit can't handle more than 2 or 3GB memory, but it can handle 2gb, that much i know.
when i start my computer. it show 1024mb ram . that counts that up. but in everything else it shows 2GB bit 1 usable.
and it says that 1024mb is hardware reserved, ( maybe it is that ? how do i change that ?
I have run a test. nothing wrong with either of the memory sticks
I also have seperat graphic card with 512BM Ram on

can someone help me , please.

Thank you

Boot into BIOS and look for max memory. should be unchecked

Ken J

 

[aem]

How did u know that only 1Gb is usable? as in what indicated this?

So you checked in Properties in computer and it has Installed memory (RAM) 1024MB?
where did it showed 2Gb?

 

[mty]

How did u know that only 1Gb is usable? as in what indicated this?

So you checked in Properties in computer and it has Installed memory (RAM) 1024MB?
where did it showed 2Gb?

check this link . it shows 2gb, but only 1usable - Bildr.no

 

[Tews]

How did u know that only 1Gb is usable? as in what indicated this?

So you checked in Properties in computer and it has Installed memory (RAM) 1024MB?
where did it showed 2Gb?

check this link . it shows 2gb, but only 1usable

What link??

 

[mty]

How did u know that only 1Gb is usable? as in what indicated this?

So you checked in Properties in computer and it has Installed memory (RAM) 1024MB?
where did it showed 2Gb?

check this link . it shows 2gb, but only 1usable

What link??

Bildr.no

 

[mty]

I have looked in several forums, including this one. and every option i have found. dont help me so much ;(

I have also checked the BIOS . but there is no place where i can dissble " Dram over 4Remapp" or something like that.

everything i can think of i have checked.

I know 32bit can't handle more than 2 or 3GB memory, but it can handle 2gb, that much i know.
when i start my computer. it show 1024mb ram . that counts that up. but in everything else it shows 2GB bit 1 usable.
and it says that 1024mb is hardware reserved, ( maybe it is that ? how do i change that ?
I have run a test. nothing wrong with either of the memory sticks
I also have seperat graphic card with 512BM Ram on

can someone help me , please.

Thank you

Boot into BIOS and look for max memory. should be unchecked

Ken J

where in the BIOS do i find that ? i dont know so much about the bios itself

 

[aem]

Are you sure your RAMs have sitted correctly and firmly? Have u tried switching RAM slots?

 

[mty]

hmm. that i have not done. i've been thinking about also. hmm, i should try that

 

[zigzag3143]

hmm. that i have not done. i've been thinking about also. hmm, i should try that

from the link I believe you are just interpreting things incorrectly. You have 2 gigs as shown in system info. Only 1 gig is available because win 7 takes the memory and puts it in cache for faster access. That is correct. In my case I have 4 gigs and win 7 takes 2 gigs for cache. You can verify this by going into task manager and looking at the performance tab. see snip

Hope this helps

Ken J

 

[aem]

Why is it that not everyone has this 'usable RAM' indication?