4 Monitor Setup - Not Working - Fixed !
Hello Everyone,
After long deliberation I went ahead and bought new PC. The purpose is run 4 monitors with two grahics card, however so far I've no luck. I udpated the drivers, searched on Google and searched here.
Here is my configuration:
Intel i7 – 950
Gigabye X58A-UD3R
2 x Gigabyte HD 5570
Win 7 64 Bit
The two card are connected via bridge and under "Catalyst Contol Center" CrossFirex is enabled.
Right now only 2 monitor works and they both conneted to same graphics card. If I swap the cables then other 2 monitor works, which tell me that one card is not working at all. However both cards are detected under Device manager.
Any help is highly appreciated.
Regards
Hello Everyone,
After long deliberation I went ahead and bought new PC. The purpose is run 4 monitors with two grahics card, however so far I've no luck. I udpated the drivers, searched on Google and searched here.
Here is my configuration:
Intel i7 – 950
Gigabye X58A-UD3R
2 x Gigabyte HD 5570
Win 7 64 Bit
The two card are connected via bridge and under "Catalyst Contol Center" CrossFirex is enabled.
Right now only 2 monitor works and they both conneted to same graphics card. If I swap the cables then other 2 monitor works, which tell me that one card is not working at all. However both cards are detected under Device manager.
Any help is highly appreciated.
Regards
Last edited:
My Computer
At a glance
Win 7 64 bitIntel i7 9506GB2x Gigabyte HD 5570
- OS
- Win 7 64 bit
- CPU
- Intel i7 950
- Motherboard
- Gigabte GA-X58A-UD3R
- Memory
- 6GB
- Graphics Card(s)
- 2x Gigabyte HD 5570
- Monitor(s) Displays
- 4
- Hard Drives
- too many
- PSU
- Coolmaster GX 650W
- Case
- Thermaltake v9 Black Edition