Acer eM 350 windows 7 install problem

M

mavci

New member
Local time
4:02 AM
Messages
2
hi!
I have Acer eM 350 netbook with Windows XP.
I bought a win 7 dvd for my netbook.
I tried to install from usb but not install
Because I get an error that "No HDD found"
but , I changed bios setting to IDE HDD and formated the HDD
could anybody help me?
 

My Computer

OS
xp
Hello mavci, welcome to Seven Forums!


As a start and to rule out format errors up front, boot the Windows 7 installer to diskpart and run the clean command, exit diskpart and see if the installer sees the HDD now, have a look through the links below and be sure to post back with any further questions you may have and to keep us informed.

   Information

It may be a help to over-write the HDD Master Boot Record (MBR) before you start any other procedure using the diskpart clean command, rather than the clean all; it takes just seconds to complete so you will have "unallocated" space to use either the Windows installer to create and format the partition(s) or use diskpart to do that, however you choose.
 
Last edited:

My Computer

Computer Manufacturer/Model Number
* BFK Customs *
OS
W 7 64-bit Ultimate
CPU
Intel Q9550 Yorkfield
Motherboard
ASUS P5Q Pro
Memory
8GB Dominator 8500C5D
Graphics Card(s)
ATI : XFX 5870
Sound Card
Realtek HD Audio 7-1
Monitor(s) Displays
1x 47" LCD HDMI & 3x 26" LCD HDMI
Screen Resolution
1920x1080P & 1920x1200
Hard Drives
1x 80GB Intel X25-M G2 SSD : 1x 500GB & 1x 640GB WD Caviar Black(s)
PSU
Corsair 620HX
Case
Cooler Master RC-690
Cooling
Tuniq Tower 120, 2x 140mm and 3x 120mm case fans
Keyboard
Microsoft 500
Mouse
Razer Diamondback 3G
Internet Speed
14 Mb/s
Other Info
1x Koutech 3Gb/s SATA HDD Hot Swap Rack
Does your netbook have a DVD drive or are you using a USB DVD drive?

If so, set it first to boot in BIOS setup, followed by HD.

Will it boot now?

What are the other settings for your HD besides IDE? Try AHCI first if you have a SATA HD.

Next try writing the DVD ISO to flash stick to try install. Install UltraISO trial version, on File tab select Open DVD, on Bootable tab select Write Disk Image, Format, Write. Boot under USB or HD's in BIOS boot order or one-time BIOS Boot Menu.
 
hi, I have no DVD drive.it is a netbook I try to install from USB I tried to change AHCI mode to IDE mode but I get the same Win 7 Installer wants driver for hdd. I have these drivers(sata and chipset driver) but it is not accept these drivers while I was browsing the sata and chipset drivers I saw my hdd drivers letter (c:,D:,x: etc...) but when I try install win 7,it did not find. thnx for all replies !
 

My Computer

OS
xp
You must log in or register to reply here.
Back
Top