achi driver for ga-p35-ds3

[XSTATION]

I saw this topic by crispy Thred 7

http://www.sevenforums.com/drivers/43049-gigabyte-ga-p35-ds3-raid-driver.html


sine then gigabyte have released these drivers for SATA


GIGABYTE GA-P35-DS3 (Rev. 1.0) | Emaplaadid - Driver

I did notie when installing XP 32 bit there was a question during
the install about mass storage drivers and select S key
You are then asked to insert a floppy
with the drivers on the floppy
since I do not have a floppy what is the alternative?

xstation

 

[pebbly]

I saw this topic by crispy Thred 7

http://www.sevenforums.com/drivers/43049-gigabyte-ga-p35-ds3-raid-driver.html


sine then gigabyte have released these drivers for SATA


GIGABYTE GA-P35-DS3 (Rev. 1.0) | Emaplaadid - Driver

I did notie when installing XP 32 bit there was a question during
the install about mass storage drivers and select S key
You are then asked to insert a floppy
with the drivers on the floppy
since I do not have a floppy what is the alternative?

xstation

copy the files to a usb stick and make sure you enable usb hdd detection in the bios

 

[XSTATION]

Thankyou for quick reply

the files I need I think are mentioned here

Intel® Rapid Storage Technology — How to load the driver during OS installation using F6 when in AHCI/RAID mode

( IAAHCI.INF, IAAHCI.CAT, IASTOR.INF, IASTOR.CAT, IASTOR.SYS, and TXTSETUP.OEM.)

this being the case what about the files in the zip file from the SATA
downloads mentioned in my first post from the Gigabyte website
the extracted files are:
jraid security catalog
jraid system file
txtsetup.oem
xraid_f setup information


xstation

 

[pebbly]

Thankyou for quick reply

the files I need I think are mentioned here

Intel® Rapid Storage Technology — How to load the driver during OS installation using F6 when in AHCI/RAID mode

( IAAHCI.INF, IAAHCI.CAT, IASTOR.INF, IASTOR.CAT, IASTOR.SYS, and TXTSETUP.OEM.)

this being the case what about the files in the zip file from the SATA
downloads mentioned in my first post from the Gigabyte website
the extracted files are:
jraid security catalog
jraid system file
txtsetup.oem
xraid_f setup information


xstation

just copy them to the usb stick after you have unzipped them

 

[XSTATION]

Thanks for reply to post pebbly

so do I only use these files and not the others
jraid security catalog
jraid system file
txtsetup.oem
xraid_f setup information

xstation

 

[pebbly]

Thanks for reply to post pebbly

so do I only use these files and not the others
jraid security catalog
jraid system file
txtsetup.oem
xraid_f setup information

xstation

sorry for late reply, place both sets of drivers on the usb windows will choose the correct one for you also you may want to have a look at this tutorial http://www.sevenforums.com/tutorials/61869-ahci-enable-windows-7-vista.html