after flash bios onboard graphic adapter not working

[hafeez]

hello can somebody help me

in my msi ms 7506 motherboard i just flashed bios to the latest version
and flash was successful

but after reboot my onboard graphic is not working


please help me?

 

[anwaypasible]

you need to find a way to get video from the motherboard again somehow (either a pci-e card or a usb video card) & re-do the flash with the same version & if that doesn't work you'll need to downgrade the version to an older one.
or
you unsolder the bios memory chip & solder in a new one with the bios already on it.

 

[RoasterMen]

What's the flash of the bios is for?

Have you made a backup of the older bios just incase anything screws up?

 

[t0mmy1977]

Remove the CMOS battery on the motherboard for 10 seconds and then put it back. This will reset the BIOS and hopefully fix your issue. You will need to configure your BIOS settings after the CMOS reset.

 

[anwaypasible]

there's a jumper on the motherboard you need to move over a pin in combination with removing the battery to reset the bios.
(tried to lookup your specific motherboard to see if it was a rare situation that didn't have one, but the website wouldn't let me. they all have either a jumper or a button to push).

 

[hafeez]

I try both but nothing happening


I think my graphics adapter has been bricked




Any one give me solution to unbrick it?