AMD RHD7800 Artifacts

[Solarstarshines]

I'm reading about your issue it could be your monitors can't keep up with the card and refresh rate

you might need to adjust monitor freq to above 60 hz

 

[lsaw2]

The primary monitor info

1920 x 1080
h 67 v 60
vga

the secondary doesn't give h/v values just says 60 lol

both are setup in display settings at 60 and only other frequency on offer is 59.

 

[Solarstarshines]

try unplugging one

 

[lsaw2]

ok will try that later, and get back to you tomorrow, I have to be using the monitors all day now!

ta

 

[lsaw2]

so unplugging one leaving just the '2ndary' monitor in use and the problems stayed. using the primary monitor on it's own was fine.

I have switched out the connector that had an adapter on it and gone for 2x dvi cables. so far had no issues but will continue to take note whilst I use it today.

ta

 

[Solarstarshines]

so unplugging one leaving just the '2ndary' monitor in use and the problems stayed. using the primary monitor on it's own was fine.

I have switched out the connector that had an adapter on it and gone for 2x dvi cables. so far had no issues but will continue to take note whilst I use it today.

ta

Your second Monitor must be bad if the Primary was fine i would send it in

 

[ShamrockRig]

Could be a faulty VGA/port in the second monitor?