another BSOD, please help

[windstory]

[Again]another BSOD, please help

My box is win 7 x64, and system is here:

cpu: i7 920
Mainboard: asus p6x58D premium
RAM: G Skill F3-12800CL9-2GBNQ
VGA: Asus Ati 5750
HDD: hitachi sata2 1Tera x 2

And bsod infomation is attached.

Additionally is there any program to show vga's temperature?
My vga has so hot. After booting my computer, I put my fingers on vga card. Then I feel so hot.

 

[Capt.Jack Sparrow]

Hello and Welcome !

VGA Card hot is not good maybe that is what causing the BSOD. Because the Dump files are pointing to Hardware. Follow this article http://www.sevenforums.com/crash-lo...top-0x124-what-means-what-try.html#post354696

Update the Following Devices :

Creative AC3 Software Decoder    ROOT\LEGACY_CTAC32K\0000    This device is not present, is not working properly, or does not have all its drivers installed.
Bluetooth 주변 장치    BTHENUM\{0000110E-0000-1000-8000-00805F9B34FB}_VID&0001000F_PID&0000\7&365B85B&0&0026E20E0CCF_C00000000    The drivers for this device are not installed.
Bluetooth 주변 장치    BTHENUM\{00001319-0000-1000-8000-00805F9B34FB}_VID&0001000F_PID&0000\7&365B85B&0&0026E20E0CCF_C00000000    The drivers for this device are not installed.
Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller #2    PCI\VEN_11AB&DEV_4364&SUBSYS_81F81043&REV_12\4&44D0CAE&0&00E5    This device is disabled.

Bugcheck:

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80083628f8, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000000, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------


BUGCHECK_STR:  0x124_GenuineIntel

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  System

CURRENT_IRQL:  0

STACK_TEXT:  
fffff880`03b626f0 fffff800`034cea89 : fffffa80`083628d0 fffffa80`0552e680 00000000`00000017 00000000`00000001 : nt!WheapCreateLiveTriageDump+0x6c
fffff880`03b62c10 fffff800`033b0667 : fffffa80`083628d0 fffff800`034295f8 fffffa80`0552e680 00000003`00000005 : nt!WheapCreateTriageDumpFromPreviousSession+0x49
fffff880`03b62c40 fffff800`03318c45 : fffff800`0348b360 fffffa80`08640a48 fffffa80`08640a40 fffffa80`0552e680 : nt!WheapProcessWorkQueueItem+0x57
fffff880`03b62c80 fffff800`03291961 : fffff880`0104be00 fffff800`03318c20 fffffa80`0552e680 00000000`0000055a : nt!WheapWorkQueueWorkerRoutine+0x25
fffff880`03b62cb0 fffff800`03528c06 : 30af30af`508a508a fffffa80`0552e680 00000000`00000080 fffffa80`0550d040 : nt!ExpWorkerThread+0x111
fffff880`03b62d40 fffff800`03262c26 : fffff880`0396a180 fffffa80`0552e680 fffff880`039750c0 8de08de0`c099c099 : nt!PspSystemThreadStartup+0x5a
fffff880`03b62d80 00000000`00000000 : fffff880`03b63000 fffff880`03b5d000 fffff880`039fe540 00000000`00000000 : nt!KxStartSystemThread+0x16


STACK_COMMAND:  kb

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: hardware

IMAGE_NAME:  hardware

DEBUG_FLR_IMAGE_TIMESTAMP:  0

FAILURE_BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_MAE_PRV

BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_MAE_PRV

Hope this helps,
Captain

 

[windstory]

Capt.Jack Sparrow/ I appreciated for your kindness!

 

[windstory]

After fixing the above-mentioned 4 drivers, I've got BSOD continuously.

 

[windstory]

Today I have BSOD too.
Please let me know what problem is this.

 

[Capt.Jack Sparrow]

Hello,


Run a Hardware Diagnostic (Memory and Hard Drive) follow this link for instructions Hardware Diagnostic !! « Captain Debugger

Try this free video stress test: FurMark: Graphics Card Stability and Stress Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net

FurMark Setup:
- If you have more than one GPU, select Multi-GPU during setup
- In the Run mode box, select "Stability Test" and "Log GPU Temperature"
Click "Go" to start the test
- Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
- Click "Quit" to exit

Try this free stress test: Free Software - GIMPS

Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight you may want to run the "Small FFTs" test instead.
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
The Test selection box and the stress.txt file describes what components that the program stresses.

Hope this helps,
Captain

 

[windstory]

Capt.Jack Sparrow/

I appreciated for your kind replies.

I'll try several tests and report here.