application error

[annie mughal]

The instruction at 0*01590302 referenced memory at 0*458d02cd. The memory could not be read.
Click on ok to terminate the program

How to solve this problem.?

 

[karlsnooks]

annie,
Welcome to SevenForums.

fill out your system specs please:
Update your SevenForums System Specs
User CP (located on the top menu bar) |
Your Profile | Edit System Spec (left-hand column)

To gather info, use Speccy (my favorite) or SIW or System Info

Add the word laptop or desktop or netbook to the
“system manufacturer” block, for example,
Toshiba Satellite L305D notebook.

Provide full windows version info, for example:
MS Windows 7 Ultimate SP1 64-bit

Use the “Other Info” block for Optical Reader,
Mouse, touchpad, wifi adapter, speakers, monitor, etc

Scroll down and click on SAVE CHANGES.
=============================================

I'm going to ask you to run about 6 tests by MemTest86+ over your memory.

I do not really think that the memory error is from bad memory, but we must be sure.

What program or driver did you add very recently?

Restore you system, using a System Restore Point, to a point in time prior to this problem

Even with no effort on your part, you have System Restore Points.

the only way not to have them is to have used one of those super-duper, speedup, cleanup your computer programs.

Here is how to restore to a previous restore point:
RESTORE TO A PREVIOUS SYSTEM RESTORE POINT
1) WIN | type SYSTEM RESTORE | ENTER | NEXT
| Choose a different restore point radio button | NEXT
2) Show more restore points checkbox (lower left)
3) Highlight the desired restore point
4) Scan for affected programs (lower right)make a note of affected programs
5) CLOSE | NEXT | FINISH


WIN = key with the wavy Microsoft flag on top.

 

[karlsnooks]

Ah yes,
I see that I left out the memtest86 link:
http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html?ltr=R

 

[annie mughal]

My System Specs plz check and then tell me

​

ID : 2357703
Submitted by ANNIE_MUGHAL | Sat, 05 May 2012 15:32:45 +0200 | Validated by CPU-Z 1.60.1


Intel Pentium 4
Windows 7 Ultimate Edition 32-bit (Build 7600)
CPU Arch : 1 CPU - 1 Cores - 2 Threads
CPU PSN : Intel Pentium 4 CPU 2.80GHz
CPU EXT : MMX, SSE (1, 2)
CPUID : F.2.9 / Extended : F.2
CPU Cache : L1 : 12 / 8 KB - L2 : 512 KB
Core : Northwood (0.130) / Stepping : D1
Freq : 2797.39 MHz (199.81 * 14)

MB Brand : Intel
MB Model : D865GLC
NB : Intel i865P/PE/G/i848P rev A2
SB : Intel 82801EB (ICH5) rev 02

GPU Type : Standard VGA Graphics Adapter
DirectX Version : 11.0

RAM : 512 MB DDR Dual Channel
RAM Speed : 159.9 MHz (5:4) @ 2.5-3-3-7
Slot 1 : 256MB (2700)
Slot 1 Manufacturer : Samsung
Slot 2 : 256MB (3200)
Slot 2 Manufacturer : Legacy Electronics

CPU-Z Forum Banner (BB Code below)

CPU-Z Validator 3.2 - Copyright 2005-2010 (c) Samuel D. / Franck D. - Visit us at http://www.canardpc.com / cpuid.com

 

[karlsnooks]

I do not why the cpu-z report, but if that means you are overclocking, then stop overclocking and your problem will probably go away.

A memtest86+ report would be good.

 

[annie mughal]

Memtest86+ - Advanced Memory Diagnostic Tool
this tool is not installing properly in my computer.
In the disc burner no DvD R Driver(H shown
And in wich the Status shows
A disc burner was not found. make sure that a burner is installed properly.and you have the appropriate permissions to burn a disc

 

[karlsnooks]

I haven't the slightest idea what is up here since I see no status msg, but:

Why don't you try to burn the file using IMGBURN. Choose 4x for burn speed and choose Verify.

The Official ImgBurn Website