Asus LapTop won't install Windows7 X64 after full wipe Hardisk

[maldukhn]

Hi Guys

i use to be on win7x32 but i bought new rams 8gb to my asus k52j laptop
i tried to install windows 7 x64 via usb -dvd dont wark- but after booting from usb and load windows files when "start windows" logo apper the laptop restart and boot agien from harddisk
so i did full wipe to the hardisk but the same problem

i used 3 copies two 64 and one 32 but the problem coun't i tried use uefi boot didnt work
i tried to use ubuntu live the same
only hiren's bootcd work

plz help !!!!

 

[gregrocker]

Everything is here to get and keep a perfect http://www.sevenforums.com/tutorials/219487-clean-reinstall-factory-oem-windows-7-a.html#post1839164

Reboot into your BIOS to look for settings on the Advanced or Boot tabs for UEFI, CSM, Compatibility or Legacy BIOS. If none are present and there are no UEFI or EFI boot choices when you go to boot the installer from the Asus Boot menu, then you likely don't have an EFI BIOS. You can also read your Manual on the Asus Support Downloads webpage for your model to see for sure.

Then work through the steps for Overcoming Windows 7 Installation Failures - Windows 7 Help Forums.

 

[maldukhn]

Thanks man

I treid to boot via uefi but the the same problem
I burn the Windows using refuse
And using partdisk command >list disk > bla bla ...
And i used windows 7 dvd usb tool

and and treid to install using uefi & normal -witgout enabling uefi -

Always the lap booting from usb normally and the windows loading files -the white bar thing- and windows logo start the problem appear after the logo the laptop restart it self and asus logo appeas and black screen with white small line at the corner

 

[gregrocker]

We need to know the results of each performing the steps from Overcoming Windows 7 Installation Failures - Windows 7 Help Forums. These steps resolve 90% of installation problem.s

Earlier I showed you exactly how to determine if you have an EFI BIOS, yet we didn't hear back what you found.

If you don't understand how to perform a step then just ask back until you can complete it, then go to the Next, until you run into a problem when you should report it back along with all details including a picture if possible. http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html