atheros ar5005G wireless adapter problem

[mie333]

i got a problem with my wireless..do smebody know the best wireless driver for acer aspire 3680..before this i use atheros ar5005G wireless adapter driver,n it work fine, but today after i finish install that driver,my device manager always show the exclamation mark on the atheros wireless adapter.n there is no wireless symbol on my network connection centre.can anybody gve me the best driver for my wireless adapter

 

[Tews]

Here is the driver for your Acer .. Acer Aspire 3680 WLAN Driver 5.3.0

 

[ionbasa]

Hey you have the same laptop as me! Here are the drivers directly from the acer usa website(even though tews got here before I did):
http://global-download.acer.com/GDFiles/Driver/Wireless%20LAN/Wireless%20LAN_Atheros_7.1.0.90_VistaX86.zip?acerid=633638854881114386&Step1=Notebook&Step2=Aspire&Step3=Aspire 3680&OS=V10&LC=en&BC=Acer&SC=PA_6

btw,dont listen to acer, the aspire 3680 is fully compatible with windows 7 x32 and x64

 

[mie333]

THANKS BOTH OF U FOR QUICK REPLY..BUT I THINK I NEED TO ADD SOMETHING..WHEN I boot my pc i get 4 error message said :
1.resource conflict- "pci network controller on motherboard
bus: 0A device:03 function:00
2.resource conflict- "pci on motherboard
bus: 0A device:09 function:00
3.resource conflict- "pci mass storage controller on motherboard
bus: 0A device:09 function:02
4.resource conflict- "pci on motherboard
bus: 0A device:09 function:03

then it also give 2 choices ,first click f1 to resume n f2 to enter setup..after i choose f1 then after that i can boot to my os.and in my device manager my network adaptor(atheros) have an exclamation mark.is it i have a problem with the driver or my hardware? what that error message mean?

 

[ionbasa]

try this:
http://www.sevenforums.com/drivers/...ts-pci-8x12-7x12-6x12-cardbus-controller.html
when it says to use the 64 bit drivers, just use the 32bit, i dont want to re-write that whole guide.
then try to re-install the atheros driver

EDIT: you could just probably skip down to where you run the installer, after seeing that you get pci issuse at boot, basicly it will install the pci drivers so pci devices can function. it would also be usefull if you posted a snippet of device manneger,also do you have any "unknown devices"?