ATi TV wonder pro x64

[Milardo]

I myself use windows media encoder 9 x64 edition ( I have x64 windows) but i think the 32 bit works as well. Watching is fine and capturing is fine, although you i experience bit of audio video desync when recording and watching, although the final capture output is perfectly fine. I also have trouble using virtualdub, so I don't actually use it at all.

Free-Codecs.com | Download Windows Media Encoder 9 Series : Windows Media Encoder 9 Series is a powerful tool for content producers

Let me know how it works and if it doesn't I'll help you troubleshoot the problems.

 

[apvm]

Thanks, I have downloaded the UT video codec and having good results with Virtuldub.

 

[Milardo]

Sure, your welcome.

 

[apvm]

Now I am having problem installing these drivers with Windows 8, refuse to install ie not digitally signed. any help.

 

[Milardo]

I don't have windows 8 myself, but in windows 7 the drivers i provided for the tv wonder pro pci are not digitally signed and one has to disable driver signing enforcement. Although I don't know it myself, download my latest driver package and try to follow the steps to enter/disable driver signing enforcement mode. If it doesn't work, let me know, and then I will see if there is a special workaround for windows 8.

 

[apvm]

By disabling digital signature, I am able to install the audio part of the driver but I got code 39 error for video capture part. any idea?

 

[Milardo]

You are installing the driver that you used in windows 7 right? Not mine right? Also are you using 32 bit or x64 windows 8? Here is explanation of code 39.


There are several causes of Code 39 errors:

• A required device driver is missing.
• A required binary file is corrupted.
• There is a problem with the file I/O process.
• A driver that is referencing an entry point in another binary file is unable to load.

 

[apvm]

I use the same driver bt848.sys that is provided in this thread and the oem28.inf that a gentlemen uploaded here at this thread as well (since I have the same ATI card) Windows 7 no problem but Windows 8 only accept it for the audio capture but not the video capture. Both are 64bit by the way. I am going to download the driver again and see if it works.

 

[Milardo]

Ok, if it doesn't work, maybe the inf needs some changes or something else. Let me know if it works out or not.

 

[gsm121]

Guys,

having the same issue so the .inf loads file but the bt848.sys file dosn't load under windows 8 x64, the inf appears fine i think it's something to do with the .sys file.

the audio part loads fine but the video part states

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

{Unable to Load Device Driver}
%hs device driver could not be loaded.
Error Status was 0x%x

if anyone has PLEASE found a fix i would be extremely grateful if you could respond

 

[Milardo]

Hi,

Which capture card do you have?

 

[gsm121]

Hiya,

it's a cctv capture card quite old, i was using the bt848 oem.inf along with the bt848.sys file from a few posts before and that was working fine on windows 7 64bit

PCI\VEN_109E&DEV_036E&SUBSYS_02280279&REV_11

if the above helps

it's a RAPIDOS RW-1020R

Rapid OS RW-1120R DVR Surveillance PCI Card Rapid OS RW-1120R RW-1120R (RW-WCR04AF)

 

[Milardo]

Ok, I don't have win 8 x64 on my pc with my tv card, but do you have driver signing disabled? Not sure if that is the cause but try that first. Did you mod the inf file for win 7 x64 to get your card to work? Maybe that needs a change, you can upload it and I can take a look if you want.

 

[gsm121]

driver signing is disabled and windows 8 is in test mode the .inf appears fine it just dosn't seem to like the bt848.sys file.

attached the file i am using

 

[Milardo]

Hi, I think you should try to delete the bt848.cat file and rename any parts of the inf file from NTamd64 to NTamd64.6.2 I got this from this site. I haven't tried it myself on my card yet though. Let me know if it works or not.

How to Make Windows 7 Drivers Work on Windows 8 (INF Modding) | PICOHELP

 

[gsm121]

get the same windows cannot load this driver - shows yellow triangle

still feel its something to do with that .sys file bud.

 

[Milardo]

Can you reupload the modified .inf file thanks.

 

[gsm121]

sure here you go

 

[gsm121]

any luck bud?

 

[Milardo]

Sorry for the late reply. I'm not sure what else to do. Your inf seems fine I think. Some questions though, how did you upgrade to win 8 x64 from win 7 x64? Was it an upgrade or new installation? Your card, is it in the same slot as before when you had win 7 x64? Have you tried uninstalling and reinstalling the driver and completely erase the driver and inf file? Also, when the driver is completely uninstalled, is there just one question mark in device manager? Let me know.