Big Problem With Windows 7,please help!!!!!!

[postfire]

i have windows 7 build 7068 x86 in my pc and i have a big and crazy problem!!!when i shutting down my pc close all monitor,hhds,all but the power is on and working cpu fan and power is on!!!I have the last bios f8f and i`m trying to put older bios(f7)but same problem!!!my parts of my pc is:motherboard Gigabyte ga-n650sli-ds4,cpu intel dual core 6600,graphics card geforce 8800gt 512mb,hdd(2-raid)seagate 250gb 7200rpm 16mb cache.if you know what is the problem to not shut down my pc please help anyone!!!!thanks

 

[Orbital Shark]

It sounds like it might be going into sleep mode i take it you're using the native 'Shutdown' button.

You could try looking at the power plan settings & checking the 'Choose what the power buttons do'. It's just a thought.

 

[postfire]

the power button in power plan is "shut down" :S i check it in power plan :S the problem is crazy :S i check all and i dont find the problem :S

 

[TripOG]

check in the bios i have a gigabyte board and i feel like i remember being able to set it in there

you can put it into suspend mode by just pressing it and to shut down it takes 4 seconds holding the button. says its for ms-dos but who knows maybe she works a little the same with win7

 

[Orbital Shark]

That does sound very strange, i'll try & look into similar cases and see if they were resolved.

 

[postfire]

im looking my bios but i dont find anything to change to fix this and shutting down my pc to press power button for 4 sec :S can you help my with my bios settings? :S

 

[Orbital Shark]

It would depend on what BIOS your machine is using. There's normally an option for 'Power Management' but without seeing it i can't be 100% certain.

 

[postfire]

my m/b is gigabyte ga-650sli-ds4 nad im using last bios f8f.the strange is before 2 days im using vista x86 home premium for along time i dont have this problem :S

 

[postfire]

[FONT=ArialNarrow,Bold]this is my bios please help!!!what must be change???[/FONT]​

[FONT=ArialNarrow,Bold]2-4 Power Management Setup[/FONT]​

[FONT=ArialNarrow,Bold][FONT=ArialNarrow,Bold][FONT=ArialNarrow,Bold]ACPI Suspend Type[/FONT][/FONT][FONT=ArialNarrow,Bold]
[/FONT]S1(POS) Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)[/FONT][FONT=ArialNarrow,Bold]​

S3(STR) Set ACPI suspend type to S3/STR(Suspend To RAM).

Soft-Off by Power button
Instant-Off Press power button then Power off instantly. (Default value)
Delay 4 Sec. Press power button 4 seconds to Power off. Enter suspend if button is pressed
less than 4 seconds.

PME Event Wake Up
Disabled Disable this function.
Enabled Enable PME Event Wake up. (Default value)
[FONT=ArialNarrow,Bold]

Modem Ring On
​

​

An incoming call via modem can awake the system from any suspend state.​

​

​

Disabled Disable this function.
Enabled Enable Modem Ring On function. (Default value)​

[FONT=ArialNarrow,Bold]

[FONT=ArialNarrow,Bold]USB Resume from Suspend​

​

[/FONT]Disabled Disable this function. (Default value)​

​

Enabled Enable USB device wake up system from suspend mode.

Power-On by Alarm
You can enable the "Power-On by Alarm" item and key in Date/Time to power on system.
Disabled Disable this function. (Default value)
Enabled Enable alarm function to POWER ON system.
If Power-On by Alarm is Enabled.
Day of Month Alarm : Everyday, 1~31
Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)

(Note) Supported on Vista operating system only.

[/FONT][/FONT][/FONT]

 

[postfire]

im trying all to change settings in bios but nothing happen!!!!!!!!!!!!!!im crazy about this problem!!!!!!!!!!!!

 

[Orbital Shark]

The only thing ringing any bells is the Instant-Off option but if you've tried all of them then i'm at a loss.

Sorry, hopfully some1 else here might be able to help.

 

[kenabi]

from what i see, it's set the way it should be to disable suspend when pushing the power button.

the issue is that it's going into suspend, which if you choose shut down, shouldn't be dropping into suspend, s1 or s3 (s1 is the mode it's using, as windows chooses that by default, s3 is where it shuts down everything but ram power to keep the data in ram active)

the issue doesn't appear to be with the motherboard, so much as it is with windows itself.

and while i can point out where the issue is, roughly, i'm sorry to say i can't offer a solution

 

[nate42nd]

When in the power plan you have, go into "change advanced power settings" I had a setting in there overriding a setting outside of the "advanced" options. You will want to go into that interface to make sure everything is set the way you want it. I had a similar problem and this is how it was solved. I think it's a bug. I am running the same build. Good luck! I really hope this helps.

 

[postfire]

before im trying and put windows 7 build 7068 x64 and when i shutting down my pc, its restarting....and after put x86 again :S maybe this problem is bug of windows 7.someone has an idea about this problem???any idea maybe help me!!!

 

[postfire]

i have other 3 pcs and im using windows 7 build 7068 x86 and works perfect and shutting down all.this pcs using intel chipset in motherboard and im trying windows 7 build 7057 before and works perfect with this version also.other pc to have a problem use nforce 650sli chipset and the problem is crazy!!!maybe this chipset has the problem???any idea helps me!! :S

 

[chev65]

If all else fails just clear the cmos and reinstall the Op system.

 

[postfire]

chev65 i will try it and i said again if this fix it,thanks

 

[postfire]

im trying to clear cmos and after install 7077 x86.Same problem again!!!my pc dont shut down :S :S any idea????

 

[jimdibb]

I'm having a similar type of problem with my gigabyte motherboad and the win 7 rc. If I set the mobo to suspend to ram, it shuts down, but the board keeps doing some kind of wierd reset. windows is down, but the mobo shuts off, then comes back on - checks all the devices, then shuts back off. It does this endlessly -- and it's hard to get the system to come back up correctly.

very wierd. I finally got some decent sleep behavior by changing to Powe on standby (the default).

got the retail version coming in a few days, hope it's fixed. -- or maybe the mobo is bad in this respect. don't know

 

[Jpeg9999]

Definitely a crazy problem indeed.

Well I have the same motherboard (Gigabyte GA-N650SLI-DS4 with nVidia chipset) and CPU (Quad 6600) as the OP tho I'm on build 7600 64bit and no issues with shutting down. I disabled all sleep and hibernation modes on my desktop immediately as they've always been shotty in the past. I have not updated the bios on my motherboard ever... since there was no functional reason to do it.

You could try the same build and that CPU is 64bit so why not?

Your problem may not be hardware related.