Solved Blue screen error after windows logo. (with video)

[bluehoney]

Just got a new Processor and motherboard I have put both into the system. Every time i load the pc up after the windows logo I get a blue screen.

I have made a youtube video showing what happens, my system information is in there also:
Need help. - YouTube

I have tried using the windows 7 repair/installion disc and system restore points, virus checks etc.

Any help please, if you need any more info just ask. ill respond quick!

 

[zigzag3143]

Just got a new Processor and motherboard I have put both into the system. Every time i load the pc up after the windows logo I get a blue screen.

I have made a youtube video showing what happens, my system information is in there also:
Need help. - YouTube

I have tried using the windows 7 repair/installion disc and system restore points, virus checks etc.

Any help please, if you need any more info just ask. ill respond quick!

Can you boot into safe mode (F8)?

we really need the log files (called dmp files)




We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.

To ensure minidumps are enabled:

* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

 

[bluehoney]

Hey when i press F8 it brings me to a screen saying:

Please select boot device:
P1: harddrive
P2 dvd/cd

I cant get into safe mode :/. Am i able to get the information you need from the asus EFI BIOS utility? or command prompt?
Also i have not tried any kind of overclocking.

EDIT: If i press F1 when system booting up I can get to the safe mode screen from there, but when i boot up safe mode I still get the blue screen.

 

[mgorman87]

EDIT: Did you format and reinstall your hard drive when you put the new mother board in? Because you can hot swap hard drives when you change motherboards. It requires that you do a fresh install.

Looking at the video, it appears you are getting a STOP 0x7B

STOP 0x0000007B: INACCESSIBLE_BOOT_DEVICE

Usual causes: Hard drive, File system, Boot sequence errors, Device driver, Virus infection (in particular check the MBR)

The INACCESSIBLE_BOOT_DEVICE bug check has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during start up.


http://carrona.org/bsodindx.html#0x0000007B


Read through that link and see if you can do any of the solutions to fix the problem

 

[bluehoney]

SOLVED!!

Thankyou for everyones help !

 

[mgorman87]

What did you do to fix the problem?

 

[bluehoney]

What did you do to fix the problem?

EDIT: Did you format and reinstall your hard drive when you put the new mother board in?

I did this, and re installed operating system.

 

[mgorman87]

What did you do to fix the problem?

EDIT: Did you format and reinstall your hard drive when you put the new mother board in?

I did this, and re installed operating system.

Ok. Thanks. Glad everything is working well