Solved Blue Screen Multiple Messages

[obardb]

Issue:
I have gotten multiple Blue Screen Messages and recently tried to do a clean install of windows. I deleted the old partition, formatted a new one and installed windows from a CD downloaded from Microsoft.

Unfortunately I keep receiving the same issues which is leading me to believe it is hardware related. After the comp shuts down from the blue screen, 95% if the time If i reboot normally, it will give the message "The file may be corrupt. The file header checksum does not match the computed checksum." I must then remove the memory and put it back it to get Windows to boot again. ( I am guessing this resets it or something.)

BSOD Messages:
1. USB_BUGCODE_DRIVER
2. PAGE_FAULT_IN_NON_PAGED_AREA
3. Others which I have not noted have appeared.

Operation System:
Windows 7 Professional Service Pack 1 (build 7601)
Install Language: English (United States)
Installed: 6/13/2011 5:58:48 PM

Processor:
2.20 gigahertz AMD Athlon 64 X2 Dual Core
256 kilobyte primary memory cache
1024 kilobyte secondary memory cache
64-bit ready
Multi-core (2 total)
Not hyper-threaded

Drives:
410.10 Gigabytes Usable Hard Drive Capacity
291.35 Gigabytes Hard Drive Free Space

HL-DT-ST DVD-RAM GSA-H55N ATA Device [Optical drive]

3.5" format removeable media [Floppy drive]

Maxtor 7L250R0 [Hard drive] (250.06 GB) -- drive 0, s/n L59JLEQH, rev BAH41G10, SMART Status: Healthy

WDC WD16 00AAJS-60PSA SCSI Disk Device (160.04 GB) -- drive 1, SMART Status: Healthy

Main Circuit Board:
Board: NF-MCP61
Bus Clock: 201 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 05/26/2008

Controllers:
Standard floppy disk controller
ATA Channel 0 [Controller]
ATA Channel 1 [Controller]
NVIDIA nForce Serial ATA Controller
Standard Dual Channel PCI IDE Controller Bus Adapters: Standard Enhanced PCI to USB Host Controller
Standard OpenHCD USB Host Controller
Display:
ATI Radeon HD 5570 [Display adapter]
Envision G918w1 [Monitor] (19.1"vis, s/n 96473CA003933, March 2007)

 

[MvdB]

Hello Obarb, welcome. Is this the same pc and problem as your previous unfinished thread? Have you tried what Mike advised to do there? What was the result? I find many of the same dumpfiles here so it looks like the same?

It looks like it's hardware and Mike pointed you in the right direction. Please follow up and if same problem and pc, clos one of the threads...

 

[obardb]

yes I created a new thread because like I said, I just did a clean install of windows 7 after making that previous thread.

When running all of the tests previously suggested:
MEMTEST86: Gave a bunch of errors FIRST time I ran it, but every time after came up clean. I have run it multiple times for multiple passes and haven't been able to get errors again.

ALL other tests passed normally...

Is there anything that could suggest that it might be my video card? I ask because most of the time I am playing a game and before getting a BSOD my graphics will get distorted for a second and the sound will get "stuck". (giving me like a buzzing sound repeating as if a record is stuck on the same sound)
This is NOT always the case as I have gotten Blue Screen just simply browsing the internet or using a non intensive program.

edit: Also I marked the other thread as solved, not sure if that will close it or not

 

[MvdB]

yes I created a new thread because like I said, I just did a clean install of windows 7 after making that previous thread.

When running all of the tests previously suggested:
MEMTEST86: Gave a bunch of errors FIRST time I ran it, but every time after came up clean. I have run it multiple times for multiple passes and haven't been able to get errors again.

ALL other tests passed normally...

Is there anything that could suggest that it might be my video card? I ask because most of the time I am playing a game and before getting a BSOD my graphics will get distorted for a second and the sound will get "stuck". (giving me like a buzzing sound repeating as if a record is stuck on the same sound)
This is NOT always the case as I have gotten Blue Screen just simply browsing the internet or using a non intensive program.

edit: Also I marked the other thread as solved, not sure if that will close it or not

Ok... have you tested the videocard with Furmark? http://www.sevenforums.com/tutorials/100356-video-card-stress-test-furmark.html

 

[FredeGail]

Hello obardb & Welcome to SevenForums!

Driver Verifier
Furmark
I noticed in your 2nd dumpfile a atikmdag.sys (ATI Video Driver) could not be verified. Either do a Furmark stress Test, or enable Driver Verifier.

Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Frederik\AppData\Local\Temp\Rar$DI07.182\061811-13468-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16792.x86fre.win7_gdr.110408-1633
Machine Name:
Kernel base = 0x82853000 PsLoadedModuleList = 0x8299b810
Debug session time: Sun Jun 19 00:50:49.921 2011 (UTC + 2:00)
System Uptime: 0 days 0:07:18.781
Loading Kernel Symbols
...............................................................
................................................................
.............................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {20, ff, 1, 8fd960c3}

[COLOR="Red"]Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+38e0c3 )
[/COLOR]
Followup: MachineOwner

Best Regards,
FredeGail

 

[obardb]

Ok, I ran the test and got to 100 degree C in about 7 mins.
I didnt see any artifacts and took a screen shot.

The Fan was at 0% the whole time and I noticed it is never running... Isn't my video cards built in fan supposed to try to keep it cool? (ATI Radeon HD 5570).

 

[MvdB]

Ok, I ran the test and got to 100 degree C in about 7 mins.
I didnt see any artifacts and took a screen shot.

The Fan was at 0% the whole time and I noticed it is never running... Isn't my video cards built in fan supposed to try to keep it cool? (ATI Radeon HD 5570).

It sure is. If you're up to it, first turn off all power and check the fan's connection + be sure it can run freely (no dust etc)

If that's ok you need to check / have the latest control software for this one and see if that can help. I hope you haven't OC'd the card? Post back if you need more explanation...

 

[obardb]

I went to check the fan, and it is broken in half...

That would explain why it isn't spinning.

I have not overclocked the device and the box says it has a lifetime warranty, so hopefully they will honor it.

I noticed one of the events involved atikmpag.sys which I am guessing has something to do with my ATI video card.

 

[MvdB]

I went to check the fan, and it is broken in half...

That would explain why it isn't spinning.

I have not overclocked the device and the box says it has a lifetime warranty, so hopefully they will honor it.

I noticed one of the events involved atikmpag.sys which I am guessing has something to do with my ATI video card.

Yep... Guess you've gotten to the core of the problem. Hope you get a replace!

 

[obardb]

Yea this is definately the issue, I didn't see another person posted about the same ATI file i was talking about so

thank you very much for the help.

 

[FredeGail]

Great news pal