Solved bosd and windows error recovery screen loop

[jessica143]

I did a restore point a week back from when my laptop was acting up..since then Ive been getting the bsod then switches to the windows error recovery screen in a loop..now..I cant launch startup repair (it loops back to the error recovery screen) and start windows normally will load but then loops back to the error recovery screen..I can go into f8 but it doesnt matter what I choose none of the options will work..I went into f12 and go into bios setup and i ran a system configuration and every thing is running fine..I also can change the boot sequence...I burned a copy of windows 7 from my desktop because im unsure how to do it from my laptop..I didnt get a cd for my laptop when I bought it and since I cant get to my desktop I can even look for it to reinstall..I have files I need to get off my laptop before I install windows 7 and I wasnt sure how to recover my files in case they get deleted before I reinstall windows 7...im a mess..pleas help..thank you

 

[YoYo155]

Welcome .
Step #1 :ar:http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html

 

[jessica143]

I can't get into anything else...this isnt going to work..the only thing I can go into is the windows error recovery screen and the f12 bios screen...nothing else ..i cant go into my desktop or go into safe mode..I went into safe mode to begin with to do a system recovery and thats when all this started..

 

[jessica143]

and in the windows error recovery it keeps looping no matter what i choose

 

[YoYo155]

Oops , sorry I got my threads crossed.
Follow this tutorial to save your files and get the dump files at the same chance.

• http://www.sevenforums.com/tutorials/287439-emergency-kit-save-your-files-dead-os.html

The dumps are located at:

C:\Windows\Minidump\*.dump

 

[jessica143]

ok..but my problem is..I cant get on my desktop at all..so how can I download these programs to help if the tutorials are requiring me to use my laptop??? im stuck on the loop..thank you for all your help

 

[jessica143]

I need to get my laptop working..I just didnt want to restore windows 7 just yet until I know a way to save my files first in case the restore deletes them..when i start up my computer i get the bsod then the windows error recovery..i cant get off of these screens

 

[YoYo155]

You can use any computer (maybe the one you're using now?), ask a friend.
What is the bugcheck code you're getting?

Follow this tutorial and select Disable Automatic Restart on System Failure that way it won't restart
right away and you can snap a picture of the BSOD.

• http://www.sevenforums.com/tutorials/666-advanced-boot-options.html

Upload it here.

• http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html

 

[jessica143]

ok.. I will give that a shot and let you know later how I made out..thank you

 

[jessica143]

[/attach]

 

[jessica143]

the blue screen will pop up when i select start windows normally...and then bring me right back to the black screen(windows error recovery) when i select launch startup repair on the black screen it brings me right back to the black screen...I have hit f8 when i selected srart windows normally and all the options appear but I clicked them all and nothing works..

 

[YoYo155]

Thanks .
This bugcheck can be either hardware, software or both.

The PROCESS1_INITIALIZATION_FAILED bug check has a value of 0x0000006B. This bug check
indicates that the initialization of the Microsoft Windows operating system failed.


[U]Cause[/U]
Any part of the disk subsystem can cause the PROCESS1_INITIALIZATION_FAILED
bug check, including bad disks, bad or incorrect cables, mixing different ATA-type
devices on the same chain, or drives that are not available becuase of hardware regeneration.

This bug check can also be caused by a missing file from the boot partition
or by a driver file that a user accidentally disabled in the Drivers tab.

I strongly advise you backup your files incase of the HDD failing!
Using the linux distro linked in post #5.

A disk check is needed to verify if installing Windows is even an option on the current
hardware, but should only be performed once the important data is backed up first!

   Warning

The following steps should not performed on an SSD!

Testing the HDD:

1. Perform a Disk Check | http://www.sevenforums.com/tutorials/433-disk-check.html
2. Then Post the results following | THIS METHOD
3. Download SeaTools for Windows if you don't want to use a CD to test the HDD you can use YUMI – Multiboot USB Creator to create a bootable USB (instructions are found at the bottom of both pages).
4. If SeaTools for Windows is unable to recognize your HDD visit HDDdiag and follow the instructions.

 

[jessica143]

Can anyone help me....the 2 snap shots i have posted above is what im getting on my dell inspiron 1750 laptop..I can go into f8 but it will not allow me to select anything..i wanted to reinstall factory settings but dont know how to do so because i cant get into my desktop..thank you for any help

 

[jessica143]

yoyo155 ..i did a check in the bios screen and everything came out clean..i also bought a imicro 2.5 sata and ide to usb 2.0 case and I was able to retrieve all my data..so im thinking its not my hardware and i cant do the disk check,,i cant get into my computer..just those 2 screens.

 

[YoYo155]

The links I've posted in post #12 have options to perform at boot / using the Windows CD.

When you say you can't select anything at the Advanced Boot Options menu (F8), what happens exactly?
Are you able to move the highlight bar up and down but not select anything using the Enter key?

 

[jessica143]

Thank you for ur help yoyo155..i put in my windows disk and that helped me get back into my desktop...I dont know if u know this or not or if I should post this else where...but I cant get my internet going..my router is working fine because all my other wireless products are working just not my laptop...that was my intial problem from the start and then i ended up with the bsod because i did a system restore a week before my intial problem started and my computer just shut down on me..so now im back to square one..

 

[YoYo155]

You're welcome I'm glad to hear you have access to your desktop again .
I'd be happy to take a look, you can post helpful info by following the instructions.
Blue Screen of Death (BSOD) Posting Instructions

 

[jessica143]

ok...but i dont have bsod any more?? I just cant get on my internet..i get a report saying problem with wireless adapter or access point..should i post this topic somewhere else or are u able to help me

 

[YoYo155]

It's up to you to decide really , I won't mind.
You can mark this thread as solved and open a different one
in the General Discussion section while lining to this thread for some extra background.

 

[jessica143]

ok..well lets see what we can do..I get a message saying i have a problem with my wireless adapter or access point..i did a run through and saw my IP Routing wasnt enabled..so I went into cmd as administrator and tried to change my value to 1 and then ran services.msc and i get microsoft management console has stopped working..switched it back to 0 and still same response