BSOD 0x00000050

[majicninja]

I received this error a few minutes ago. Upon googling it microsoft stated there was a hotfix for this error. Upon downloading and going to install the fix it stated it was already installed.

My RAM, Video Card and Hard drives are not faulty. My processor is not faulty. My bios was updated May of this year. All my drivers are up to date.

I can not view the .dmp file in the dev tools because it states i have the wrong symbols. This i do not understand.

I am uploading the dmp file to see if any of you can help me with this error and get it fixed.

 

[Tepid]

You might also want to check the following,.,...
I am not saying this is it, but it will not hurt to check and make sure....


The computer may automatically restart, or you may receive a "serious error" message or a Stop error message in Windows Server 2003, in Windows XP, or in Windows 2000

 

[majicninja]

Unfortunately that doesnt pertain to my version of windows. Windows 7 Ultimate x64 build 7600 is my version of windows.

 

[Tepid]

Read it anyway and see if this is an issue,.,,,, just cause it does not say Win 7,, does not mean it may not affect Win 7.

Probably should have mentioned that earlier,,, but,, as stated,, it will not hurt to check and make sure first. Could save you some time if that is what it is.

 

[majicninja]

Ok my system isnt restarting automatically. Its blue screening out. It just did it again and said something about cdd.dll in it. Other than that I can not diagnose the problem because the symbols i have are not correct for some reason. This is a FRESH install of windows 7 ultimate x64. I have Windows 7 ultimate x32 on another PC and its not blue screening at all. I run AVG Full Antivirus Spyware and Rootkit.

Ran memtestx86 on both sticks of OCZ Gold edition RAM. Both pass test. So I know its not RAM Video or hard drive or my DVDRW.

 

[wish]

Hi,
It seems your Asus driver is obsolete and must be updated ASAP.

Then uninstall RivaTuner because it has some issue with windows 7.

Update these drivers:

ASACPI.sys   Sun Mar 27 18:30:36 [COLOR=Red]2005[/COLOR] → [URL="http://support.asus.com/download/download.aspx"]Asus ATK0110 ACPI Utilit[/URL]y
Rt64win7.sys Thu Feb 26 01:04:13 2009 → [URL="http://www.realtek.com.tw/downloads/"]Realtek NIC driver[/URL]

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff900c345dcf0, 0, fffff960002acced, 0}


Could not read faulting driver name
Probably caused by : win32k.sys ( win32k!SFMLOGICALSURFACE::OwnsSurfaceCleanup+2d )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff900c345dcf0, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff960002acced, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 0000000000000000, (reserved)

Debugging Details:
------------------


Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002ab10e0
 fffff900c345dcf0 

FAULTING_IP: 
win32k!SFMLOGICALSURFACE::OwnsSurfaceCleanup+2d
fffff960`002acced 488b4f20        mov     rcx,qword ptr [rdi+20h]

MM_INTERNAL_CODE:  0

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x50

PROCESS_NAME:  dwm.exe

CURRENT_IRQL:  0

TRAP_FRAME:  fffff880087dc920 -- (.trap 0xfffff880087dc920)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000011 rbx=0000000000000000 rcx=fffff900c761c570
rdx=00000000551238f7 rsi=0000000000000000 rdi=0000000000000000
rip=fffff960002acced rsp=fffff880087dcab0 rbp=0000000000000001
 r8=0000000000000000  r9=0000000000000000 r10=fffff900c2e2fb90
r11=0000000000000001 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
win32k!SFMLOGICALSURFACE::OwnsSurfaceCleanup+0x2d:
fffff960`002acced 488b4f20        mov     rcx,qword ptr [rdi+20h] ds:c570:00000000`00000020=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff800028f9f14 to fffff80002879740

STACK_TEXT:  
fffff880`087dc7b8 fffff800`028f9f14 : 00000000`00000050 fffff900`c345dcf0 00000000`00000000 fffff880`087dc920 : nt!KeBugCheckEx
fffff880`087dc7c0 fffff800`0287782e : 00000000`00000000 fffff900`c761c570 00000000`00000600 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x42837
fffff880`087dc920 fffff960`002acced : 00000000`00000002 00000000`551238f7 00000000`551238f7 00000000`00000001 : nt!KiPageFault+0x16e
fffff880`087dcab0 fffff960`002ac1fe : fffff900`c761c570 00000000`00000000 000038f7`624d4653 00000000`0000001d : win32k!SFMLOGICALSURFACE::OwnsSurfaceCleanup+0x2d
fffff880`087dcae0 fffff960`002ad103 : 00000000`00000000 00000000`551238f7 fffff900`c761c570 00000000`01f48f40 : win32k!SFMLOGICALSURFACE::DeInitialize+0x4e
fffff880`087dcb20 fffff960`00209bf7 : 00000000`00000000 fffff900`c00bf010 fffff900`c761c570 00000000`00000020 : win32k!bhLSurfDestroyLogicalSurfaceObject+0x4b
fffff880`087dcb60 fffff960`0022aed0 : 00000800`00000001 00000000`00000001 fffff880`087dcca0 00000000`00000000 : win32k!GreSfmCloseCompositorRef+0x10f
fffff880`087dcba0 fffff800`02878993 : fffffa80`05db0b60 00000000`020ff600 000007fe`f9c7d610 00000000`00000000 : win32k!NtGdiHLSurfSetInformation+0x1a8
fffff880`087dcc20 000007fe`fea04efa : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`020ff058 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x7fe`fea04efa


STACK_COMMAND:  kb

FOLLOWUP_IP: 
win32k!SFMLOGICALSURFACE::OwnsSurfaceCleanup+2d
fffff960`002acced 488b4f20        mov     rcx,qword ptr [rdi+20h]

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  win32k!SFMLOGICALSURFACE::OwnsSurfaceCleanup+2d

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: win32k

IMAGE_NAME:  win32k.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4c7dc13c

FAILURE_BUCKET_ID:  X64_0x50_win32k!SFMLOGICALSURFACE::OwnsSurfaceCleanup+2d

BUCKET_ID:  X64_0x50_win32k!SFMLOGICALSURFACE::OwnsSurfaceCleanup+2d

Followup: MachineOwner
---------

 

[majicninja]

Updated the ACPI Utility and the Realtek Ethernet drivers. I do not have Riva Tuner installed on this pc. I use EVGA Precision. Easier to understand and I only use it to turn my fan up on my graphics card. No overclocking capabilities on this motherboard. So no sense in overclocking the video card. Thank you for helping me with the debugging. If i have any more problems with this I will be glad to post again.

 

[wish]

You're welcome, hope that solve your problem