Bsod 0x0124

[yazzou89]

i7-2600K 3.8 GHZ Overclocked at 4.3 Vcore 1.2 offser + 0.070
P8Z68 V-Pro Gen 1
GTX 970 4GB
SSD Crucial M4 120 GB
Corsair HX850
16 GB Corsair vengeance

Basically had this pc since sandy bridge 2011, overcloked since then.
Used to be 4.4GHz 1600 DDR3 Everything auto , used ASUS Optimal.

Now on that setting I get crashes but when i asjust it.

4.3 Ghz - 1600 MHZ DDR . Offset + 0.070 1.2V I Ran OCCT 30 Min no BSOD in comparison to before BSOD Occurs below 10 min.

Tested CPU Using OCCT and Prime95

I have 1 Ram stick that faulty apprently, found out , booting 1 by 1.
Figured it ram so am gonna buy stick 8GB stick DDR3. I really need to do know if my i7 days are coming to an end or not !

I used the program of this site to collect BSOD Data ! upload the rar file it put on my desktop

 

[axe0]

If you're still overclocking, it is recommended to revert back to stock.
Overclocking can cause several problems including the crashes you say you have (there are no logs about BSODs).

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

1. Uninstall Daemon Tools
2. Download the SPTD standalone installer and follow these steps:
   • Double click the executable to open it
   • Click on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

 

[yazzou89]

is that the cause of the bsod ? based on all the info given ? a probable cause

 

[axe0]

If it is the cause of the BSOD I can't say, there are no traces of crashes except for unexpected shutdowns/restart and thus I can't analyze properly the BSODs.
Though overclocking is 1 of the most occuring causes for the 0x124.

 

[andywl94]

Hello Axe
Can you help me with my problem? i already posted it but no one help me until now. thanks