BSOD 1e

[Tryggvason]

Hi, i have an BSOD and i need our Help:

Dump File         : 030415-26457-01.dmp
Crash Time        : 04.03.2015 23:02:53
Bug Check String  : KMODE_EXCEPTION_NOT_HANDLED
Bug Check Code    : 0x0000001e
Parameter 1       : ffffffff`c0000005
Parameter 2       : fffff800`034eefd1
Parameter 3       : 00000000`00000000
Parameter 4       : ffffffff`ffffffff
Caused By Driver  : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+74ec0
File Description  : NT Kernel & System
Product Name      : Microsoft® Windows® Operating System
Company           : Microsoft Corporation
File Version      : 6.1.7601.18717 (win7sp1_gdr.150113-1808)
Processor         : x64
Crash Address     : ntoskrnl.exe+74ec0
Stack Address 1   : 
Stack Address 2   : 
Stack Address 3   : 
Computer Name     : 
Full Path         : C:\Windows\Minidump\030415-26457-01.dmp
Processors Count  : 8
Major Version     : 15
Minor Version     : 7601
Dump File Size    : 276.960
Dump File Time    : 04.03.2015 23:05:28

I Hope u can Help me, the Problem Solving.
Thanks

 

[koolkat77]

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

• RAM - Test with Memtest86+

The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.

*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
​

If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.

*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
​

*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
​

3. Test the next stick of RAM (stick #2) in the next motherboard slot.

*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
​

*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
​

4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.

   Information

Errors are sometimes found after 8 passes.

   Tip

Memtest should be done overnight.