BSOD after the computer is on for a few days

[frederic1]

Hello, I get a BSOD after the computer is on for 1 or 2 days. It wasn't happening before. Thank you for your help and all the help you are providing for free. You Rock Guys !

Cédric.

 

[axe0]

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

1. Uninstall Daemon Tools
2. Download the SPTD standalone installer and follow these steps:
   • Double click the executable to open it
   • Click on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

Diagnostic Test

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums

   Note

MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a photo of the result and post it.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.

 

[frederic1]

Hello axe0 and thanks a lot for your reply

Could you give me another link to SPTD standalone installer ? The link you mentionned goes "403 Forbidden". Thanks

 

[axe0]

Disk-Tools.com

 

[frederic1]

Done (it was already uninstalled).

Thanks a lot ! I'll come back to you if there's still a BSOD

 

[frederic1]

Hello, I got another BSOD 48 hours later

Here's the dump.

 

[frederic1]

Could you help me please ?

 

[johnhoh]

suggest you fill out your specs in detail on your profile page

 

[axe0]

Please uninstall everything of AMD using Display Driver Uninstaller and install new drivers from AMD. Be sure to install as less as possible software using custom/advanced options, you can use this tutorial to do so :ar: AMD Graphics Drivers - Install Without Catalyst Install Manager

5: kd> lmvm atikmdag
Browse full module list
start             end                 module name
fffff880`0f486000 fffff880`10be3000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
    Image name: atikmdag.sys
    Browse all global symbols  functions  data
    Timestamp:        Fri Feb 26 21:29:22 2016 (56D0B5A2)
    CheckSum:         016E9637
    ImageSize:        0175D000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4