BSOD after waking from sleep

[a135rt6]

Hi.

i seem to keep getting bsod after waking the computer from sleep

i just installed fresh windows seven with driver genius 12 driver update so i'm not sure why Im getting problems

this problem also occured in vista, but more randomly

followed the windows 7 diagnostic tool grab all dump

the laptops a standard HP dv6 1215sa 4gb ram 300gb hard drive 2.2ghz turion dual core

thanks

 

[YoYo155]

a135rt6, welcome to SF .

Both bugchecks indicate an issue with the storage:

CRITICAL_OBJECT_TERMINATION [U][B][COLOR=Blue](f4)[/COLOR][/B][/U]
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa8006e3db30, Terminating object
Arg3: fffffa8006e3de10, Process image file name
Arg4: fffff800031d30d0, Explanatory message (ascii)

EXCEPTION_CODE: (NTSTATUS) [U][B][COLOR=Blue]0xc0000006 [/COLOR][/B][/U]- The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an [COLOR=Blue][U][B]I/O error[/B][/U][/COLOR] status of 0x%x.

FAILURE_BUCKET_ID:  X64_0xF4_[COLOR=Blue][U][B]IOERR[/B][/U][/COLOR]_IMAGE_wininit.exe

BUCKET_ID:  X64_0xF4_[U][B][COLOR=Blue]IOERR[/COLOR][/B][/U]_IMAGE_wininit.exe

-====================================================-

KERNEL_DATA_INPAGE_ERROR [COLOR=Blue][U][B](7a)[/B][/U][/COLOR]
The requested page of kernel data could not be read in.  Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, [COLOR=Blue][U][B]0xC000009D[/B][/U][/COLOR] or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: 0000000000000020, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc000009d, error status (normally i/o status code)
Arg3: fffffa80050307c8, current process (virtual address for lock type 3, or PTE)
Arg4: 0000000000000000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

ERROR_CODE: (NTSTATUS) [U][B]0xc000009d[/B][/U] - STATUS_DEVICE_NOT_CONNECTED

DISK_HARDWARE_ERROR: There was error with disk hardware

• 0xC000009D, or STATUS_DEVICE_NOT_CONNECTED, indicates defective or loose cabling, termination, or that the controller does not see the hard disk.

-------------------

  Log Name: System
  Source: cdrom
  Date: 2013-08-18T17:17:34.837
  Event ID: 7
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: user-PC
  Description: 
[B]The device, \Device\CdRom0, has a bad block.[/B]

This was logged numerous times in the Event Viewe and indicates a failing CD-ROM drive / controller.

-====================================================-



Testing the HDD:

1. Perform a Disk Check | http://www.sevenforums.com/tutorials/433-disk-check.html
2. Then Post the results following | THIS METHOD
3. Download SeaTools for Windows if you don't want to use a CD to test the HDD you can use YUMI – Multiboot USB Creator to create a bootable USB (instructions are found at the bottom of the page).

Post back with the results!

​

 

[a135rt6]

Hi thanks for your quick reply

ive done both disk check and seatools (quick check)

ive included the disc check in the attachment and another SF diagnostic log

i dont know where the seatools log is but it didnt tell me about any problems. do you think i should run a long test or can you tell me where the log is?

how do i test the cd rom drive it has never cause me any problems

thanks again

 

[YoYo155]

Your PC appears to be overheating often!

  Log Name: System
  Source: Microsoft-Windows-Kernel-Power
  Date: 2013-08-19T20:39:36.718
  Event ID: 88
  Task: N/A
  Level: Error
  Opcode: Info
  Keyword: N/A
  User: N/A
  User Name: N/A
  Computer: user-PC
  Description: 
The system was hibernated due to a critical thermal event.
Hibernate Time = ?2013?-?08?-?19T19:39:36.718808600Z             
ACPI Thermal Zone = ACPI\ThermalZone\THRM             
_[COLOR=Red][U][B]HOT = 373K[/B][/U][/COLOR]

Download Speccy and Post a Screenshot of the summary window under two conditions.

1. Normal use for 30 minutes.
2. Strees Tessting With Prime95, :warn: Keep a close eye in the temperatures don't let it exceed 80°! If it does STOP the test and shutdown the PC in a safe manner using the Shut Down option in the start menu.

 

[a135rt6]

lol its overheated since the day it was bought brand new check the temps without the stress test!! its never been able to go on high performance mode because it shuts down constantly its always on power saver. and i'm only browsing the internet no videos or anything. cant use hdmi output cause it overheats. its been cleaned inside and had the fan replaced

cheers mate!

 

[YoYo155]

Well that must be it, if not than a big part of the issue.

How old is the laptop? thermal pads, like anything, degrade over time.
Most BIOSs these days have an option to set a fan profile, i.e. Silent / Normal.
Check and see if yours offers this option.

you can also purchase a cooling-mat for it and see if it helps, making sure that the air vents
doesn't look like this picture I took today would go a long way.

View attachment 282560

 

[YoYo155]

Any developments?