BSOD again

[fantasy87]

Hi,

i am getting BSOD once again.
I solved it last time via doing some voltage adjustment on the ram but after being stable for a few days, BSOD comes back again.

Would like to request the help of you guys once again cause i do not know how to debug the BSOD.

There are so many over the week, that i zip all dump file up and uploaded them.

Minidump.rar

these are the dump files and will greatly appreicate if anyone could help. thanz

 

[ickymay]

Hi,

i am getting BSOD once again.
I solved it last time via doing some voltage adjustment on the ram but after being stable for a few days, BSOD comes back again.

Would like to request the help of you guys once again cause i do not know how to debug the BSOD.

There are so many over the week, that i zip all dump file up and uploaded them.

Minidump.rar

these are the dump files and will greatly appreicate if anyone could help. thanz

when uploading files please upload here on the forum , for the 27 .dmp files you attached most of them are memory errors

I suggest try running your system with only one stick of ram and monitor for crashes ?

also please fill out your system spec with exact motherboard\ram make and model so we can take a look at compatibility issues ?

It's highly likely you have at least one bad stick if they are compatible ?

 

[fantasy87]

ASUS P7H55-V motherboard with I3 530
WD GREEN 1TB
Nvidia Geforce 9500GT
Coolermaster extreme power plus 460W
corsair 2gb x2 DDR3 1333MHZ (specifically VS2GB1333D3)
windows 7 64bits

these are the current config.

i tried to volt the ram to like 1.6V currently.
so i have no idea what is wrong with the ram.

done memtest86 over the night before and it show no error.
some guys told mi i need to find a low voltage ram to use instead and this current ram is high volt.

 

[Crispy]

Upload the dump files to the fourm like ickymay sead and see my sig on how to update your system specs.

 

[fantasy87]

the minidumps are up in the 1st post.

OS Windows 7 Ultimate x64
CPU Intel Core I3 530 LGA 1156
Motherboard P7H55-V
Memory Corsair 2gb x2 DDR3 1333MHZ VS2GB1333D3
Graphics Card PALit 9500GT
Sound Card None
Monitor(s) Displays LG 206WT
Screen Resolution 1680 x 1050 16Bit
PSU eXtreme Power PLus 460W
Case CoolerMaster 310 Eilter
Cooling Front 120mm fan (1400 RPM) /Rear 120mm (1400 RPM)
Hard Drive Western Digital 1TB Green

above is the specs as required.

 

[Crispy]

Refer to this link How to - System Specs on how to fill your system specs out and please upload your dump files to the forums NOT mediafire.

 

[fantasy87]

ok sorry bout that didnt know the rules. I just updated the profile. its my sis com btw. just uploaded the file onto the forums also. sorry for the ignorance.

 

[Crispy]

OK you need to update your graphic card drivers and directX also run Memtest86.com - Memory Diagnostic because you probably have faulty RAM.

 

[fantasy87]

thank you once again. will do so and see if it solve the problem.

 

[Jonathan_King]

Memtest should be run for at least 5 passes, keep in mind.

Also run a system files check. Open an elevated command prompt and enter sfc /scannow.

 

[fantasy87]

ok. thank you for the reminder.
but when i tried to do scannow on dos, i am getting this message

"windows resource protection could not perform the requested operation"

followed excatly as the link but that is what i gotten.

 

[Jonathan_King]

Try running the SFC from within Windows. Just type cmd into the start menu, right-click and select Run as Administrator.

 

[fantasy87]

hmm im getting the same result, same message poped up

 

[Jonathan_King]

Well do the memory test I guess.

Also, a repair install may be in order.

 

[fantasy87]

alrity... thanz once again.

 

[ickymay]

have you tried running with only one stick of ram ?

 

[fantasy87]

yup done it. it seems there is not problem on both sticks... so far...

 

[ickymay]

yup done it. it seems there is not problem on both sticks... so far...

this suggests you have two possible causes for your crashes ,

1. one of your ram sticks is bad
2. two sticks change the timings making the system unstable

can you RMA the ram or system to the makers ?

can you get hold of any other ram to see if this cures it ?

 

[fantasy87]

hmmm i can RMA on the rams. but i cant get another ram to try out... the other coms i have run on DDR2.
i think will go RMA as soon as i got the time.