BSOD All week.

[xemath]

Blue Screen Page Fault In Nonpaged Area. Stop: 0x00000050

Hi guys, I've been having this error constantly.
I've tested my ram 20 passes on memtest, no errors.

SPECS:

G-skill 1300 2x2GB (4GB) RAM
300GB Seagate Barracuda Hard Drive
Nvidia 8800GT
520W PSU
Cooler Master G-Lite Mid Tower
Asus RW CD-Drive

 

[FredeGail]

Hello Xemath and welcome to Sevenforums.

Please post your specs in your actual profile.*

BSOD ANALYSE

*Updating System Specs will give us a better sight of
how your system is put together. It's simply done.

§ Download Speccy
§ |User CP (top of the page)| |Edit System Spec|
§ COPY & PASTE section to section
§ Include Laptop, Desktop information
§ End with |Save Changes|​

Combining your crash dumps and the general view of BSODs culprits, I'd suggest you to have a look at your memory, the sticks. Through decades people have been using the bootable tool called Memtest86+ and it's basically very unique in these manners.
:info: Be sure to check your warranty rules and regulations before opening your case.

* Memtest86+ is USB-ready, and can be booted directly from it. Download the flashdrive wizard.
* To ensure that either your sticks OR your motherboard slots are broken, it's necessary to do the below procedure-
* Pull out all sticks except ONE, scan it.
* If no errors, pull the scanned stick into another slot.
* Proceed like this until you've scanned all sticks individually, and all the slots.​

​

1: kd> !sysinfo cpuspeed
CPUID:        "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz"
MaxSpeed:     3300
CurrentSpeed: 3309

Have you increased the CPU voltage a little?

Best Regards,
Frederik.

 

[xemath]

Hmm... I haven't, but I'll go into my Bios and check!

 

[FredeGail]

Sweet, anyway just make sure to run 6-7 passes of Memtest86, using the method in post #2.

Have a great eve.
Fred.

 

[xemath]

I will go ahead and run it like that.

As for as I could tell for the cpu speed, on my Gigabyte bios, the M.I.T said I was running at 33x... I dont see how the extra 09 would get in there, or how I could possible remove that...

 

[FredeGail]

It's no problem. Sometimes the motherboard may maintain its own values regarding voltages, it's a very few it's adding or subtracting.

Memtest86+ is the next step.

Best Regards,
Frederik.