BSOD at random moments (ntoskrnl.exe seems to cause it)

[TheSasswagon]

I've found the source of my similar crashes; it was the WiFi card or its drivers. It could have also possibly been the port the WiFi card was plugged into. Either way, removing the TPLink TL-WDN4800 from the port labelled PCI_E1 on the motherboard has solved it. If you have that card or something in that port it might be worth a shot. Good luck!

 

[LynG3]

thx the sasswagon i will check that if the bluescreen appears again, but i reinstalled windows and i see if it will fix the problem.

 

[LynG3]

well now it happend again after the reinstall and i didnt manage to get a SS of the BSOD, however Whocrahed says the exact same thing:


[FONT=Segoe UI, Arial]Crash dump directory: C:\Windows\Minidump[/FONT]

[FONT=Segoe UI, Arial]Crash dumps are enabled on your computer.
[/FONT]
[FONT=Segoe UI, Arial]On Wed 08-06-2016 14:42:46 GMT your computer crashed
crash dump file: C:\Windows\Minidump\060816-7020-01.dmp
This was probably caused by the following module: [FONT=Segoe UI, Arial]ntoskrnl.exe[/FONT] (nt+0x6F400)
Bugcheck code: 0xF4 (0x3, 0xFFFFFA8010135B10, 0xFFFFFA8010135DF0, 0xFFFFF80002FC9E40)
Error: [FONT=Segoe UI, Arial]CRITICAL_OBJECT_TERMINATION[/FONT]
file path: C:\Windows\system32\ntoskrnl.exe
product: [FONT=Segoe UI, Arial]Microsoft® Windows® Operating System[/FONT]
company: [FONT=Segoe UI, Arial]Microsoft Corporation[/FONT]
description: NT Kernel & System
Bug check description: This indicates that a process or thread crucial to system operation has unexpectedly exited or been terminated.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.


[/FONT]
[FONT=Segoe UI, Arial]On Wed 08-06-2016 14:42:46 GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: [FONT=Segoe UI, Arial]ntkrnlmp.exe[/FONT] (nt!KeBugCheckEx+0x0)
Bugcheck code: 0xF4 (0x3, 0xFFFFFA8010135B10, 0xFFFFFA8010135DF0, 0xFFFFF80002FC9E40)
Error: [FONT=Segoe UI, Arial]CRITICAL_OBJECT_TERMINATION[/FONT]
Bug check description: This indicates that a process or thread crucial to system operation has unexpectedly exited or been terminated.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.


[FONT=Segoe UI, Arial]I havent switched the wifi card yet i will try [FONT=Segoe UI, Arial]that now however, as this problem [FONT=Segoe UI, Arial]inst[/FONT] cons[FONT=Segoe UI, Arial]t[FONT=Segoe UI, Arial]int i wil[FONT=Segoe UI, Arial]l try to trouble[FONT=Segoe UI, Arial]shoot all the thigns again to see if i missed [FONT=Segoe UI, Arial]something[/FONT] [FONT=Segoe UI, Arial]somewhere[/FONT][/FONT][/FONT][/FONT][/FONT] [/FONT][/FONT]
[/FONT]

 

[axe0]

BSOD Posting Instructions