BSOD BcCode 1e

[PCJohnson1974]

Hello I have been having lots of BSOD crashes and I need some help figuring out if it is a piece of hardware on my machine or what is up. I have reformated my machine yesterday but I am still having all sorts of BSODs. This is the latest one

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 4105

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000094
BCP2: FFFFF880010B3176
BCP3: 0000000000000000
BCP4: 0000000000000006
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\041312-16676-01.dmp
C:\Users\Paul\AppData\Local\Temp\WER-40887-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

View attachment 207117

View attachment 207118

 

[PCJohnson1974]

Just had another one


Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 4105

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88004D980C0
BCP3: FFFFF880021069E8
BCP4: FFFFF88002106240
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\041312-21216-01.dmp
C:\Users\Paul\AppData\Local\Temp\WER-114177-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

 

[PCJohnson1974]

View attachment 207139

 

[PCJohnson1974]

how do i get help with this?

 

[writhziden]

Do you have antivirus software??? Recommend that you take a look at the following two options.

• Microsoft Security Essentials - Free Antivirus for Windows
  
  
• http://www.sevenforums.com/system-s...-system-security-combination.html#post1732627

The crashes you are getting are consistent with malware/viruses, so I would recommend updating the security software you install and then running full scans of the system with each program.


You also do not have any Windows Updates installed. The crashes you are getting can also be caused by missing Windows Updates. Please install all Windows Updates ASAP.

After you have done those steps, we will proceed with further analysis and troubleshooting.

 

[PCJohnson1974]

Ok I have done all the updates and have installed AVG free i ran scans and the all showed up clean...this is also after a fresh format.

 

[PCJohnson1974]

I actually was using TurboV EVO autotune to Overclock my system. I thought that might have been the cause of all my problems as I was leaning towards bad ram or a bad hard drive. I have disabled the OC and things were going good. I have recently had several crashes/reboots so it is obviously not fixed.

 

[writhziden]

Please provide us with the latest crash reports for analysis.

 

[PCJohnson1974]

Newest reports

View attachment 209311

My machine will sometimes not post. I have to turn of and on a few times to get it to post.

 

[writhziden]

Sounds like you have some BIOS issues or hardware that is not installed correctly. Does your motherboard support site have a stable, non-beta BIOS update available beyond your version 0801?


Your .dmp files were corrupted and inconclusive. Corruption of .dmp files can occur if there is data corruption on the system, there are hard disk errors on your hard disk, there is a problem with your RAM, or you have a corrupted Windows installation.

• If you are overclocking any hardware, please stop.
  
  
• Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors checked for all SSDs. Post back your logs for the checks after finding them using http://www.sevenforums.com/tutorials/96938-check-disk-chkdsk-read-event-viewer-log.html.
  For any drives that do not give the message:
  Windows has checked the file system and found no problems
  run disk check again as above. In other words, if it says:
  Windows has made corrections to the file system
  after running the disk check, run the disk check again.
  
  
• Run http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html to provide us with the sfcdetails.txt file if errors occur.
  
  
• Run the Western Digial Data Lifeguard Diagnostic tests on your hard disk to make sure the disk is not faulty.
  
  
• Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
  
  For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
  1. Shut down and turn off your computer.
  2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
  3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
  4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working.
  Once these steps have been followed, it is safe to remove and replace components within your computer.

In addition, could you please fill in your system specs on your profile (not in a post in this thread). http://www.sevenforums.com/tutorials/180324-system-info-see-your-system-specs.html can help with filling in the system specs.

 

[PCJohnson1974]

updated bios...still got a few BCCode 1e this morning.

Wil run the memtest and check disk etc tests over next few days. How do I make sure it is not my cpu?

It will sometimes crash and then not post and just hang until i power down and power up.

 

[PCJohnson1974]

running a utility that came with motherboard called PCProbe...it monitors voltages heat etc.

MY CPU fan is running at 3500 rpm aprox and power fan at 600 rpm....all the rest seem normal could this mean anything?

 

[writhziden]

There are some hardware checks for the CPU.

• Monitor temperatures during the following tests.
  
  Use the following programs to monitor the temperatures.​
  • Real Temp is a good CPU temperature monitor.
  • Speccy - System Information - Free Download will monitor all hardware temperatures.
  • HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools can be inaccurate for CPU temperatures, but is a good program for GPU temperature monitoring.
  • Run http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html to determine any hardware problems. Run all three tests for a few hours each. If you get errors, stop the test and post back here.
    
    
  • Follow the steps for doing a CPU stress test using IntelBurnTest

Those fan speeds are probably normal and nothing to be concerned with unless you are having temperature related problems. The above steps should help to determine whether temperature is an issue.