Solved BSOD Blue screen Error - BCCode: 1000007e

[kamal]

Hi i started to get bsod not sure why no new programs no new hardware really frustrating because im not very good with this stuff please help me i attached the file.

 

[kamal]

BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF880050FACEE
BCP3: FFFFF8800374D578
BCP4: FFFFF8800374CDD0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

 

[essenbe]

Hello, kamal and welcome to Seven Forums. I have looked at most of your dump files and they we really consistent with the same error code and the same driver blamed.

Ak27x64
start             end                 module name
fffff880`052ed000 fffff880`0558f000   Ak27x64  T (no symbols)           
    Loaded symbol image file: Ak27x64.sys
    Image path: \SystemRoot\system32\DRIVERS\Ak27x64.sys
    Image name: Ak27x64.sys
    Timestamp:        [COLOR=red]Wed Dec 07 11:13:57 2011[/COLOR] (4EDF9ED5)
    CheckSum:         002AB75A
    ImageSize:        002A2000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

That is your Ak27x64 Killer Wireless-N 1100 Series LAN device driver and appears to be way out of date. I would recommend you visit the Manufacturer's web site and download the latest driver for your computer.

One other file lists

iaStor
start             end                 module name
fffff880`01002000 fffff880`013a6000   iaStor   T (no symbols)           
    Loaded symbol image file: iaStor.sys
    Image path: \SystemRoot\system32\drivers\iaStor.sys
    Image name: iaStor.sys
    Timestamp:        Tue Nov 29 21:39:19 2011 (4ED5A567)
    CheckSum:         0009778C
    ImageSize:        003A4000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Which is your sata comtroller. It comes from Intel Rapid Storage Driver and while you are downloading the above driver, I would look for a more up to date version of this driver.

Please update those drivers and see if you get any improvement.
Also please open a elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

I would also run your hard drive Manufacturer's diagnostic test To check you hard drive for errors. There were many references to NDIS system, I/O procedures and Filter Manager which are all functions of your hard drive as is iaStor.

 

[kamal]

Thank you very much everything is back to normal sorry for late response was out of town.

 

[essenbe]

Well done. I'm glad you have it running as you like it.

 

[corolla]

Anyone can help me here please? Thank you!
http://www.sevenforums.com/bsod-help-support/349693-bccode7f-anyone-can-help.html#post2916394

 

[essenbe]

corolla, You have posted in someone else's thread which is marked as solved. You will get a much better response if you start your own thread. Just go here BSOD Help and Support - Windows 7 Help Forums and click the big orange New Thread botton and give it a descriptive title znd an explanation of your problem and include http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html. Be sure to fill out your system specs in detail in the correct place too. this will help you.

Please fill out your System Specs​

   Information

Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.

If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. http://www.sevenforums.com/tutorials/180324-system-info-see-your-system-specs.html​